• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. gimpyrobb

    M35a2 Wont start

    Point of fact, some of the IH tanks used the exact same in tank pump we have, except they were 12v.
  2. gimpyrobb

    M35a2 Wont start

    Best bet is to dump it, solder up the holes, then start fresh. Blow out the fuel lines and swap in all new filters.
  3. gimpyrobb

    Day Trip Ohio-Indiana

    Whats the sellers name, Adam?
  4. gimpyrobb

    Put on your thinking caps. Oil leaking

    Are you sure its motor oil? Many of us have had the trans puke oil out the input shaft.
  5. gimpyrobb

    deuce wont start.

    Yeah but the manual doesn't know about 40yr old truck common issues like we do...
  6. gimpyrobb

    Front Mounted Winch Verification

    All the 5ton winches I've seen are the same. The only difference is the 939 trucks are driven by hydraulic motors.
  7. gimpyrobb

    Part Identification grill 2.5 ton???

    Yes, for the grill, the same.
  8. gimpyrobb

    Should I Turbo my 6.2L M1010

    First thing I'd recommend is pulling the injectors and have them pop tested and adjusted. I put new injectors in my truck and it made a huge difference in starting and power. I was going to have mine adjusted but found a smoking deal on new.
  9. gimpyrobb

    South Wind heater

    Some of the guys on the m715zone have used theirs, might do some searching over there.
  10. gimpyrobb

    Rebuilding a 24v starter so it is 12v??? Possible or Not.

    I didn't see anyone mention if you change to 12v, your amp draw will go up and you need wires that can handle the higher current so you dont set your vehicle on fire.
  11. gimpyrobb

    M35a2 Wont start

    Yup, make sure you have enough fuel in the tank first. Sorry I skipped that one.
  12. gimpyrobb

    Cleaned HH and now won’t start

    Whichever gear drives the injection pump, it spins twice for every rotation of the motor. Sometimes you just need to accept things that are hard to understand. You can try what was posted about getting the pump in phase with the motor or you can ignore it. Its only time and effort. I've had Hyd...
  13. gimpyrobb

    M35a2 Wont start

    When was the last time you put new fuel filters in? Has the truck ever ran? Is the in tank pump running?
  14. gimpyrobb

    Cleaned HH and now won’t start

    If the hyd head is 180 out of phase, your just sending fuel to the wrong cyls. No big deal, pull it up and rotate it once, bolt back in place, good to go.
  15. gimpyrobb

    M720 pump replacement or rebuild

    Enerpac p51 pump! I may have one or two available.
  16. gimpyrobb

    M720 pump replacement or rebuild

    The pumps if memory serves are parker something-50 pumps. Should be rebuild-able.
  17. gimpyrobb

    Temps will drop drastically tomorrow here-What type of engine heater do you use ?

    If your serious about it, nothing beats a fuel fired coolant heater.
  18. gimpyrobb

    What did you do to your deuce this week?

    Slate, your looking at post count, not pages.
  19. gimpyrobb

    Air Filter CFM requirements for 3116 and 3126

    Ive got a bunch of mrap air filters if you want more volume then stock for cheap.
  20. gimpyrobb

    KY checking in

    Hello from Cincinnati, your near LBL? About 250mi from me. Post pics when you get a chance.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks