Search results

In

Which type of turret?

So what pump should I be looking for on Ebay? I have one in a similar situation.

my entry please

No problem at all this far. Some of the steep hills I have done, were completely unnoticeable.

I would like to know that too...

I made sure all my threads and surface were immaculate. I used torque wrench, though I am anal about that. That's a rear wheel right? I didn't see the snap ring being trimmed or put back on the shaft.

Thank you!

Great, thank you. Anyway to find out the Amp rating on this contactor? A807-1501, I have searched high and low and couldn't find specs

So you are saying taking at apart and see if I can source a magnetic switch then? Where did you get yours?

I am never 100% of anything in life... That being said, there is 24v at the magnet with the loadbank turned on. It's not retracting. I also used a separate 24vdc source, with everything else off, straight on the magnet, its not doing anything at all... I took that as an indication it's the...

My loadbank I've had for several years quit working last weekend. Today, I had the time to open her open. All the basics check out. Checked the contactor. Moves freely and there is 24v at the coil, but it's not kicking in. Little electromag give up the ghost? Very carefully with isolated...

Would anyone have info on how to reset the Dip switches on the back of the Speedo in a A0 truck to get correct reading again? Right now, it shows exactly half the actual GPS verified speed, which of course makes sense. Not that I can't quickly double the speed read in my head, but still, it...

I have about 150-170 miles now. Not very much, but I am very happy with the mod. Now that the transmission has taken a little time to learn, you come up to a 55mph hill, keep holding the accelerator down, and truck will down-shift. Sometimes even two quick sequential down-shifts, and you keep...

I have done two sets balanced with Antifreeze, first the original G/Y and now my ORDs. ONLY drawback is you will loose it, if you air up/down a lot. I don't, so tires stay good for several years at least.

75w90 Synthetic gear oil https://www.amazon.com/Ultra1Plus-75W-90-Synthetic-Gear-Gallon/dp/B0885YTHKG They also sell it in Qts.

Not All the steps, but I did do mine last weekend and took some pics https://www.steelsoldiers.com/threads/eco-hub-install.214700/

Yeah, I'll let you know. I plan on driving it more now, with the Eco hubs. I usually daily drive a HMMWV most year round, so I am used to military vehicles...

I put a quart in which is what my instructions said.. On the rear, I had not put the drain plug on the diff in, and I noticed when I put a quart in the hub, it was enough to flow back to diff. Just a little trickle though. Truck was perfectly level on concrete pad.