Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Here we are going into the final days of the November 2019 MV of the Month, and we have a very nice M38A1 Jeep tied for 1st place with an equally nice GE Center Cab Locomotive. I'm sure this is a first.
Whatadeuce. You might try JB Weld on the hole. I've used that stuff for just about every type of repair and it always seems to work. Put a patch over the hole and the JB Weld over the patch. Make sure the surface is clean!!
I use these anti corrosion discs as well as the above mentioned spray and never have any terminal corrosion problems. You can find them both at NAPA, Walmart etc.
Just about got the front brakes done, got the wheel cylinder, flex line and left hand brake line installed. I should have the shoes, seals, and bearings installed today. A few years ago this job was a couple days worth of work, but now as I stumble into antiquity, this job has taken me over a...
It's going to be 70 Degrees thru Thursday, and after that the temps are rolling downhill into the 50s. Trying to get the front brakes finished on the old Iron Mistress by Thursday. We haven't had any real winter weather yet, but I'm sure we will by the end of the month.
Got some good weather coming in the next several days so I'm doing the front brakes. Replacing the shoes, wheel cylinders, flex lines and a general clean up. I also have a new drag link that I'll be installing while the drivers side front wheel is off.
https://www.businessinsider.com/air-force-f117-nighthawk-stealth-aircraft-still-flies-after-retirement-2018-7 Guy, here's a little info on the recent sightings of F-117 aircraft operating in the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!