• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M35A2-AZ

    IH DT466 swap

    I have a DT-466 in my 1970 Gallion motor grader and it has a lot of hours on it.
  2. M35A2-AZ

    Winch questions: Will 5-Ton fit a Deuce? Conversion? Etc.

    T-case pto will not fit the deuce. Just put a HD motor on the winch for the bed. That is what they did to the M939 5 ton winch on the front. Then you have to have a pump for the winch that runs off the PTO on the transmission or the transfer case.
  3. M35A2-AZ

    M936 Tug-o-war, spade use vid.

    Great test to see thanks!!
  4. M35A2-AZ

    Suggestions on buying a M934A2?

    Sorry but I sold my M934 before I had to deal with the seals in the body. I would say the insulation is about the same as the M109 box.
  5. M35A2-AZ

    Turned away from camp grounds??

    I have been to a number of RV parks with my M923A1 and had no problems.
  6. M35A2-AZ

    Saving deeply discharged Optima 51R's

    The Genius 10 is a 6v & 12v, The G7200 was 12v and 24v.
  7. M35A2-AZ

    Saving deeply discharged Optima 51R's

    Not sure, But I notice the G7200 is not on there web site anymore. Good luck with it.
  8. M35A2-AZ

    Saving deeply discharged Optima 51R's

    NOCO has stop making the G7200, but you can still find them online. They are making the G15000 and G26000 that are 12v and 24v.
  9. M35A2-AZ

    M936A2 ABS control module location

    Yes it can be. You find a problem, you look it up, you fix it and wait for the next problem. Then after a little time you know your truck from front to back.
  10. M35A2-AZ

    M936A2 ABS control module location

    It is up over the center axle, on the right side.
  11. M35A2-AZ

    4 battery set up

    If you are talking about the smaller wire, that is for the 12v side of the heater motor. Should be wire #569 I think.
  12. M35A2-AZ

    halftrack back from an outing

    Very Nice!
  13. M35A2-AZ

    MV of the year 2019

    I do not see it, I only see 11 names to vote for.
  14. M35A2-AZ

    MV of the year 2019

    How can we vote for 155mm? He is not listed in the poll
  15. M35A2-AZ

    Happy 2020 Steel Soldiers

    IN
  16. M35A2-AZ

    Engine oil- Military or civilian?

    I also use Rotella 15w-40 in all my trucks. Sam's Club has it as a good price from time to time.
  17. M35A2-AZ

    Cargo cover stave length

    If you have the taller cover you need the taller one. But 45" sound right for the std. height cover.
  18. M35A2-AZ

    How long is too long to let sit!

    When you drive it I would get it up to temp. and let the drive train get up to temp. also.
  19. M35A2-AZ

    M35a2 Intake Manifold Bad Casting Or Rusted Out

    I think that is caused by cavitation in the water system. I would use some JB weld or use some Alum. Devcon. Then use a good epoxy paint on the inside.
  20. M35A2-AZ

    Battery group number for M35A2

    So true!! But way to pricey for me.
110,879members
165,312threads
2,326,208posts
2,079online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks