Search results

Hi Warthog, Yep should have done that before I ever installed it, as its always possible. "New" doesn't mean it works, thats for sure. Thanks

Latest Update: My Dad and I spent most of the day yesterday, working on the CUCV. I searched for and found the ground strap on the top back passenger side of the engine, just below the edge of the air filter... although after finding it, I searched more thinking surely there is another one...

Hi Doghead! I replaced all the battery cables about 2 years ago, with some heavy duty quality cable that I ordered. But anything is possible, I had already planned to go through all the cable ends and bus-bars, and just give everything a fresh clean-up and check all the connectors and such...

Hi Cpf240! I replaced both batteries about 2 years ago. They are Heavy Duty Interstate with the highest cranking amps I could get. With the initial problem happening, right after we had drove to and back from town, I don't think the batteries are bad or anything. I don't personally have a load...

Hi Richingalveston! Thanks for the reply. Yes, Grounding is what I intend to look next, as the symptoms are pointing in that direction. I hadn't thought about a ground strap burning though like the fusible links did, that is a good possibility and if is the case then the old starter may...

Another Update... Ok, the last update I posted, I had just gotten the Brand New Wilson starter and bracket installed. Today, I finally had time (and the weathers cooperation) to replace the two fusible links and go through the rest. I replaced the two links that had burned. And while going...

Hi Scottladdy! Thanks for the reply and info. I thought about it for a few days, but in the end since this is the first time since we've owned the truck (nearly 3 years now) that any fusible links had burned, I just went ahead and replaced the burned fusible links with new all new fusible...

Ok, another short update: O'reilly finally got the replacement starter for the broken replacement starter that they shipped me. So I went to their store, inspected, and picked up the new replacement.... but they did not have the fusible link that I needed... so I found and ordered a kit of 6...

hummm.... following this thread. I would like to upgrade a couple fusible links that burned when my starter locked (nose cone cracked and put the starter in a bind, in process of replacing/rebuilding) with maxi fuses. And several other circuits too, like headlights and other important items...

duplicate post...

Well, I have an update.... sort of... Got the Wilson starter today via UPS. The large outside box was in perfect condition, no tears, holes, dents, etc. A lot of heavy packing material in the box, with the smaller box which contained the starter in the middle of the packing material. The...

Hi CucvRus! I had originally intended replacing the fusible links with maxi fuses just like you mentioned, as it would make it much easier to change out a blown fuse in the future. But at least from what I understand (and I could be wrong) that doing so isn't advisable. But I don't know for...

Needful information to know. With our M1008, this is the first vehicle that I've personally had to deal with fusible links. Had heard of them before, knew what they did, but didn't know the details. Thanks to All who have added input and information to this thread! [thumbzup]

Ahhhh..... its on the black connector... well, that makes more sense. Should have known it would have to be located somewhere else besides on the wire covering.... I didn't know the wire color would also specify the gauge, that makes it much easier too. Appreciate the heads up about the...

Yep, I've been reading it. Edit: Well let me rephrase that, I am reading it... but theres a lot good info in the additional comments below the two main posts. Thanks! [thumbzup]

Thanks CucvRus! Appreciate it, will be looking for it. [thumbzup][thumbzup][thumbzup] The starter is supposed to be here tomorrow. I still have to go and buy some fusible link wire. But I have to identify what gauges I need first, as it looks to be 2 different sizes. But the size is not on...

Wow Warthog Thanks a Bunch! [thumbzup][thumbzup][thumbzup] I've been going to look, but haven't had time to even get on here for 2 days now. Pitching and Catching right now. I think I'll order the nose cone and a rebuild kit you posted, and rebuild this starter to have a backup on hand...

Hey TGP (IL)! Yep, you are correct :-)

Thanks Warthog! I also found it in the CUCV Wiki too: ***bracket bolt - 14060613 - M8 x 1.25 x 20 - hardware store ***starter bracket DD - 14028931 I was just thinking I would have to figure out the bolt sizes when I came across that info in the Wiki. That one note alone just saved me a lot...

Hi Doghead! Yeah, I can see why, with the starter hanging by only two bolts on the one end. Wish I had noticed that before now, but at least it broke (didn't start) here at the house and didn't leave me sitting somewhere. Thats one reason why one of the first things I did to this truck was...