• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 155mm

    MEP-804B Governor control actuator problems

    here is another to read https://www.steelsoldiers.com/showthread.php?174975-MEP-804A-cranks-but-no-start-suspect-solenoid-on-side-of-injection-pump&p=2092210&highlight=#post2092210
  2. 155mm

    MEP-804B Governor control actuator problems

    check magnetic pickup also, read this one, post #19 has a video on a 804 'how to check mpu' https://www.steelsoldiers.com/showthread.php?178809-MEP-805B-no-power-to-the-ADC100-Electric-Actuator
  3. 155mm

    MEP-805A will crank but Won`t Start.

    Search the interweb for jdg820
  4. 155mm

    MEP-805A will crank but Won`t Start.

    You can see the electric fuel pump on the right side of the photo, and the magnetic pickup at the top
  5. 155mm

    MEP-805A will crank but Won`t Start.

    /|\ | | That tool is what you use to roll the motor without using the start in the hole on the injector pump side
  6. 155mm

    MEP804-B Phase Question

    Try searching buck converter
  7. 155mm

    MEP-805A will crank but Won`t Start.

    its worth 60 bucks in bandaids and busted knuckles
  8. 155mm

    MEP-805A will crank but Won`t Start.

    I would use the barring tool access to inspect the flywheel. That access port is on the injector pump side, opposite side of the starter. This is the tool that goes in that hole.
  9. 155mm

    Generator yellow then to green once warm

    If it ends up being a regulator or bearing, read this thread. https://www.steelsoldiers.com/showthread.php?145991-60-amp-rebuild-I-got-stupid&highlight=
  10. 155mm

    Generator yellow then to green once warm

    check the alternator bracket on the bottom adjustment slide, make sure its not broken. also verify the rear support to manifold is present. and the dirty word spacer is between the gen and mounting bracket.
  11. 155mm

    MEP-1060 AAMPS 30KW Fault

    come visit, bring family, have a shop with heat, tools, cold frothy drinks, bring a camper and plug in next to ours also have a couple genny's and a 33 and 70kw load tester. And an AMi if you get things a bit too warm.
  12. 155mm

    MEP-1060 AAMPS 30KW Fault

    so, on a side note, ammps are for the rich and famous.
  13. 155mm

    Its not a MEP but I bought it

    The Onan 7500 thats in our camper gives an hour and a calender time on replacing belt. They werent hard to do, but the removing it from the camper and the gajillion skrews that hold the skin on were the worst part.
  14. 155mm

    mep 804a not working.

    Does the governor on the back of the injector pump look like its been molester, I mean, worked on by a 52d? can you adjust the hz/volts down before it safety's out?
  15. 155mm

    mep 804a not working.

    Yes you are correct on only pulling 10kw. If you need single ph, use leg 1 and 3, lets make them run correctly first.
  16. 155mm

    Steel Soldiers MV of the month 2019 - February VOTE HERE!

    Thanks for all the votes yall. It sure has been a fun competition, there has been a few that I didnt want to vote for myself on. Thanks again.
  17. 155mm

    charging the batteries

    this is the charger that I use, mainly because its 24v.
  18. 155mm

    Truck names - whats yours?

    My wife named her, wife said 'All i see when I look at the truck is the name AMi' so thats what she got named.
  19. 155mm

    HEMTT steering pump specs

    The pn will be on the flat, if no tag, possibly in dot matrix print.
  20. 155mm

    HEMTT steering pump specs

    that looks like the same one on my first truck, 96 freightliner. there will be a part number on the case of that pump, I will go get a pic of a different pump, (like same, but different) for locating the pn. Then google is your friend.
110,897members
165,315threads
2,326,252posts
1,356online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks