Search results

Hears the story, Started the deuce moved it 30 ft. shut it down, went back to start it, wouldn't turn over just a clunk. I have replaced the starter and the relay, still a clunk. The amp meter in side the cab gets nailed when I push the starter button, so theirs a short somewhere. I have checked...

Thanks, I understand about the wires, but the wires in the manual and the way their connected between the relay and the starter is different from what I remember when removing them. So that's why I'm asking for the pic. Again thanks for helping me.

I started my deuce the other day no problems, shut it off, tried to restart nothing. sounded like the starter, removed it found teeth broken so I replaced the starter. Still wouldn't start, so I replaced the relay, but I made the mistake of looking at a maintenance manual before I rewired and it...

Can anyone help with info on replacing valves on a 1970 M35a2 non-turbo engine I believe it is a LTD 465 Thanks deconn

Does anyone have pics or vids of a 1970 Kiaser/jeep M35a2 Engine stops insides? Wire that holds screws broke and they came out. We have the parts but are not shure how they go back. We have a paint brush looking pin and a washer with 3 small tabs. We were getting ready for the parade tomorrow...

We removed the fuel control rod, but while cleaning it we did loose the tab on the end. Can we replace the tab or the whole rod and where can we find it? Thanks Deconn

The fuel cut off lever. Deconn

I have a Kieser/jeep M35a2 1970, with a White engine, the engine stop won't work. We took it apart and found that it was gummed up, once we cleaned it, it seemed to work better but it doesn't spring back. Anyone know how this thing is supposed to work, and where does that spring loaded plunger...