Search results

I can't get the inner plunger to budge so I'm guessing that it's all the way down and something is broken inside. Next problem - I removed the 4 allens and I can't get it apart. Should I take the 4 nuts off an remove the whole thing?

That's great. Hopefully I'll have time to try it tomorrow. I already took the outer cap off and the inner one looked like some kind of adjustment. It isn't? Do I need to count the threads or just tighten it all the way when I put it back on? Thanks!

Yes, Dock that is the board. I got it all hooked up. The diagram on the top of the box is faded so badly that it isn't a lot of help. Thanks! Thanks jastacitizen I may need one but now I need to get it running...

After hooking up the DC voltage regulator and AC regulator board the starter relay would click but the starter solenoid wouldn't do anything. Further investigation revealed the reason I didn't have 24V at the DC regulator. Some smart guy that installed the starter switched the positive and...

I just bought this unit yesterday and am going over it. The first problem I found was the 24V voltage regulator wires were all disconnected but I found a picture here and have it connected. I checked the red marked wire and it didn't have 24V so I traced the wire to the control panel. The...