Search results

I have a M931 Truck and found a set of LMTV wheels and tires. Will these wheels and tires fit my 5 ton? Thanks for any input.

Thanks guys for the info. I will let you know what I find. I really appreciate it.

Ok thanks. I will buy a new governor. I may look into buying a new air dryer system as well.

This is a 3116 CAT motor and I have looked all over and the only poppet valve that I can find is the one on the thermostat housing for the air clutch I believe and on the air dryer. The one on the air dryer blows off at 175. Cant find any others. Looked all over the CAT motor including around...

So far I took off the governor, I adjusted the bottom screw by 2 turns out which increased the kickoff pressure. I let it built to 140 psi and shut it off because it hadn't blown off yet. Took off the governor, screwed the screw back in 2 turns to the orig setting and then went an additional...

Thanks for your reply. The upper and lower has been rebuilt. I just think it blows off too much. Is it normal?

I Have a 1999 M35A3 I rebuilt the Air Dryer and Purge Valve, bought the HALDEX rebuild kit from NAPA, put $183 in it. This was rebuilt last year because the truck sat all winter (Nov 2013 - Feb 2014) and the purge valve was stuck open and leaking air out the bottom. It fixed that issue and had...

Thats a good possibly seeing how its a 4 speed transmission . Ill probably add a transmission cooler to try and play it on the save side

You wouldn't think there would be much difference in between the 1400's and 1600's but im still learning.

gimpyrobb I live around Newark ohio

Well thanks for your input maybe I should run the 1600's with stock gears first then. It would suck to have a truck with no power to move .

lol Very true ill be posting pic soon I'm a new be with the hole military trucks but I'm addicted now . I'm about ready to pull the trigger and place the order for the 4.90 ouverson gears I talked to randy told me that it would be a 20% mph increase in speed with stock tires . I just hope that...

Thanks for you reply , I was just worried about the backspacing with running my stock a3 wheels with bigger tires

I have a 99 M35A3 w/ 6" lift and looking to upgrade tire size to 1600/20. I'm not sure about running my stock A3 wheels. I have been looking at machining the HEMTT wheels w/ an adapter plate or I found some wheels that require no machining work and appears you use MRAP adapter plate but have...