Search results

Speedwoble you were right, all drive shaft bolts backed out from transmission. My problem is, I cannot figure out how to separate or have enough room to install new bolts. The drive shaft is in a water tight drive shat casing. I have removed rubber boot,, the 2 piece metal collar and a plastic...

Here are picks of drive shaft were connects to transmission were a couple of bolts are falling out thanks for heads up Speedwoble

Put truck in 4th gear did step on accelerator some speedometer does move some .Would this be indication of driveshaft bolt came backed out. Just asking I put 419 in 4 wheel drive

The oil looks clean. Need to check if speedometer is working in 4th gear I thought it was. Good Question Need to check again Will crank up truck again and put in 4th gear and recheck

Yes Sir changed transmission oil 3 times with 80/95 gear oil. From all the plugs. Installed New gear shift collar that was problem first time was totally desegregated.. Gear shift worked smoothly after that. Put down clutch can here electrical solenoid engage. Let off clutch in first gear can...

Speedwoble ,, My 419 Unimog is stuck in neutral . I did everything you said earlier and my 419 was operating perfectly So I got confident and put on highway but broke down 4 miles away from home, everything working perfect was driving speed of 45 for first time and transmission went clunk...

LOL Absolutely, Thanks for the unimog student handout and other information I am much more confident how to proceed with your instructions.Thanks Speedwoble

You are correct here in GA. Ok Cool must be stuck with rust. Transmission was filled with water, drained a few times refilled with gear oil. Bought this unimog at a auction in County of Swainsboro GA maintenance department about 4 months ago. The City was using it untill they parked it 5...

Thanks for responding, However I am a new owner of this unimog 419 And had to replace the 8 speed gear shift supporting collar already now gears shift smoothly. But still won't go into PTO gear , shift lever is stuck foward, Is there something I'm missing, does unimog need to be in a...

PTO shift lever in cab is stuck foward will not shift into PTO for backhoe ,any suggestions thanks