Search results

Production has resumed on SSBs after a redesign of the frame to make it stronger and easier to assemble. In-stock versions ready to finish and ship are available in mil-spec desert tan and flat black. One tan civilian sailcloth (Hummer H1 material) also available. Other colors and materials can...

Hello all! I’m glad to say I’m back at my sewing table. During my hiatus I acquired a few hundred yards of milspec pvc vinyl and am learning how to sew it. Some time ago someone asked me if I could make a flat bed cover but I was stumped by how to join it with the curtain. I’ve since learned...

Has anyone on the forum used an ATK Remanufactured 4L80E in their HMMWV? I had a cooling loop clog and my trans bit the dust a while back. I've been randomly finding time to search for a repair/replacement and this appears the best for the money, especially considering a local rebuilder wants...

I haven't been able to find a thread with a similar issue, so am posting my own: my HMMWV 6.5L TD and 4L80 surges when at idle but in Drive, but only when it is well warmed up. Cold the motor/trans holds idle fine when the transmission is in Drive. When the motor/trans warm up, and I come to a...

I was tracking down a flashing Wait light and figured out it was the grounding wire to my Nartron box. What happened is the rubber mounts for the box had crumbled and then let the bolts slack up. I intended to remove the box (batteries disconnected of course) and add rubber bushings all...

I'm on my second regulator and still not getting 12VDC output. Can anyone tell me if the alternator make BOTH voltages, and needs both regulated, or does it only make 24VDC and the regulator or some other feature in the circuit converts 24V to 12V or something? This is my first dual-voltage...

On the off hand chance anyone knows this, I'm trying to find a replacement male 37-pin connector for a HMMWV 4L80E control box. I've searched various manufacturer's websites and catalogs for Amphenol mil-spec connectors, and found plenty of 37-pin versions, but none with what appears to be the...

Having trouble finding one. AMG doesn't have one, and HPG says the old school A0 one is discontinued. I'm sure AMG didn't design a heater core just for the M998, and reused something from Detroit. Anybody know which one? Bulldogger

Besides Breton Industries, does anyone know the company names of any other military (especially Humvee) soft top and cargo cover manufacturers? I am looking for a company interested in taking over making my soft slant backs. I just don't have time, but hate to think they would die with me (so...

Picked up from CARMAN this weekend. Looking forward to a hopefully quick rehab and putting it to use. Much lighter than my M101 and once repaired will have surge brakes. I’ll be doing some searching here to find the part number for the brake reservoir and master cylinder. Fingers crossed the...

Having rubbed my passenger side mirror off on a tree at the Graves Mountain rally earlier this month I am looking for replacements. I don't care for the military options, especially in that the captured nut in the HMMWV mirror will eventually rust and I won't be able to adjust the mirrors as...

I have a 1962 M101 and need to inspect and repack the wheel bearings. The available TMs here and elsewhere online are for the later models that use the simple bearing cup grease cap, not unlike the modern M116's or what have you. The older model has a 6 bolt cap in the middle of the spindle...

My ride sometimes clunks, sometimes doesn't. I'm not familiar with the cause of this, and wonder if it's something I can address outside of a trans rebuild. (Please don't say it's a trans rebuild, oh please.) My ride is a stock 1987 M998 with 6.2L NA and standard drivetrain. All fluids are at...

While my Prime account is in processing so I can post to the classifieds, I’ll open this new thread to allow for new thoughts and conversation to go beyond my original thread for development of this concept...

I have a line on a flatbed generator trailer in good condition for $500. It has, or had, good tires brakes and wiring. Problem is I need a cargo trailer, like an M101. Is it worth the fuss of trying to make a cargo bed on top of the generator bed, or should I go with my gut and just wait for a...

I noticed after a few driving sessions following the installation of a new steering pump on my Humvee last weekend that the fan is always clutched in. This means that the fan changes speed with the motor. It also means the engine takes a long time to get up to operating temperature. It doesn't...

I mentioned this in my HMMWV rebuild thread but don't think anyone noticed, so putting it out here. I've noticed what appears to be a new tiny bit of weeping between the head and block at the front left corner of the motor. Tiny, tiny bubbles when it's running. I don't think it's using up...

My 1987 M998 has been doing fine. We went to Graves Mountain and had a blast last month. Acted odd yesterday, so bear with me while I try to give you experts all the information I can... Coming home Sunday evening from TheCaptain's place, I noticed after a long haul (25 miles maybe) at...

I was under my HMMWV last evening looking for the source of the intermittent grumbling/rattle (I feared it was from the transfer case due to the position and this pained me to think about). Underneath the beast I spotted what looked like a long black sheathed cable coming out of the top left...

Mine is shot. Barely actuates and sounds terrible when it does. My horn button is also shot. Only works some of the time. I see a member with some horn buttons here. But I don't see any horns for sale. There are a lot of threads here about horns for deuces, but not much about the Humvee...