Search results

I have notice that after the genset warms up to operating temp. the oil pressure goes for 40 psi to 20-22 psi. I am running Rotella 15w-40 engine oil and engine oil is up to the fill mark on dipstick. I understand it will drop in pressure if engine is brought down to idle but I would think it...

I'm in the process of cleaning/disassembling the K1 AC Circuit Interrupter. My question is how do I get to the inside to clean the part that moves up and down? I tried to pry the plastic top off but did not want to break it. I have taken all the contacts off the top and cleaned them already. TIA

When I purchased my MEP-803A it showed 1/4 tank of fuel on the gauge but would not start due to the no fuel light was on. Put 2 gallons in it needle moves between 1/4 and 1/2 tank and it fired right up. Fast forward a month as I'm load testing it the needle moves to 1/4 tank and generator shuts...

I recently purchased a MEP-803A generator. I am in the process of replacing the fuel tank wells and decide to replace the gaskets for the fuel sending unit, pickup tube, and the dual float level since they are in bad shape. My question is how do I go about removing the dual float level? When I...