Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks for all the info
I will lightly clean it and run it through a few heat cycles and then make a decision. Probably leaning on getting it replaced or rebuilt.
Looking for some advice
When I removed my bumper to change out my cab mount bushings I noticed what appears to be seapage on my lower radiator.
I haven't noticed any fluid loss but does this look like the start of a radiator failure
General you are correct I should've started a new thread
Ronmar I did the test on the governor you suggested and it does appear to be working
This coming weekend I will connect a gauge to the wet tank and hook up shop air and look for a leak
I am having the same issue with the air dryer purging about every 30 sec with the old style. I then read through the TM and it said replace the air governor because when I take the control line off I feel air coming through (when line is off no purge) so I Put a new governor on with no change...
Good afternoon does anyone have the 2 throttle linkage springs laying around or know of a source to buy a set
the TM show part numbers
Inner spring 15961524
outer spring 15961525
currently only the inner spring is broke and the truck runs
looking for the set
but willing to just take an...
This may sound dumb but When i first got my 96 model i had they same type of issues I couldn’t get any speed what so ever and transmission wouldn’t go into 6 gear some of the time and never 7th
So after banging my head against the wall because I couldn’t open the cab do to a leaking Oring on...
Well just wanted to say thank you All for opening my eyes up to the driveline issue
Needless to say my front shaft was a wreck
$1300 later she drives smooth
This is from the site.
Didn’t have a good pic of the pin but the site said this was an alternative
https://www.finditparts.com/products/4846484/bosch-0332209204441#description
Looking for some help to locate a source to buy a Double v groove idler pulley
Part number
12420812 pulley
933-M16X50 Bolt
I have the bracket but it is pretty beat up
Looking for parts or entire assembly