Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Awesome, this is exactly what I wanted. I have a big 1" impact wrench as well, so long as the truck has enough air to loosen the lugnuts enough to get them off by hand the rest of the way, I should be good. Thanks!
I've been searching the google and this forum trying to find the answer to "what is the air pressure coming off the gladhands" but can't find any info. My intent is to find out if there is enough flow off the emergency line to run an impact hammer capable of moving the lugnuts. Thanks!
Is a torque multiplier wrench something that would work for a tirechange kit? Something like this: https://tinyurl.com/y9s65x9b
Considering the alternative is a massive pneumatic driver with gladhand adapters…
I did not. Mine goes from telling me 100% when it's half filled, to "fuel level too high" and then it will read 23% or so when it's completely dry. It hasn't been a major issue yet since I just keep it topped off and use my eyeballs to check the level. It just tweaks my obsessive compulsion for...
Yeah we have "covered vehicle exemption" which allows us to ignore the need for load limits or CDL when running heavy ag stuff around in-state and some distance across state lines. From the other posts it seems like the frame and hardware will take it, just gotta be confident about the tires...
I know the LMTV (1078) is rated for 2.5 tons/5000 lbs cargo, but it's got room for 6 pallets in back. Would it break stuff driving on-road with 6 full tons in the back? I ask out of practicality-- I bought this truck for farm use and would like to use it to haul feed. Thanks!
Do you have any measurements on the bottom/base part of it? I've got various trailer chassis sitting around wondering if it will fit any of them. Can't find any specs online of the base, just the overall size. Looks like it fits well in an 1101/2.
I ordered one from him, good thing anyways because this old one won't work despite being cleaned up, and I broke off one of the brass fittings reinstalling it.
I get 27v from the plug on startup and with the fording switch on. Is there a way to get it to "engage" thinking that the thermal...
I opened up the solenoid, looks like there was a bit of schmutz on the contact part of the valve. Maybe this is what was making it stick? The rest appears OK at least to me. I might have a 24v power supply around here somewhere I can test it with.
I guess at this point the next thing I can test is "what is happening on the solenoid wires?" so what should I look for here? Assuming 24v power? What is the default vs activated state (ie: does power to the solenoid open or shut the valve?)
So, this guy here I assume is the line going to the fan. I disconnected it as shown to see if it would push air after start. Engine cold, idled until brakes, CTIS, etc were well pressurized and the air dryer was honking periodically. Nothing happened here at the solenoid. I tried the fording...
Couldn't leave it alone so I did some more troubleshooting. I think it's the solenoid. Plenty of pressure supplied on the manifold side, but none coming through the pipe to the fan clutch after starting up and letting it run for a while. Photos forthcoming...
1998 M1078A1. I've checked CB22 and it's fine. Checked the sender with a boil test and it works properly. The fording switch does not disengage the fan. I also tried shorting/unshorting the sender cable and it makes no difference. So either it's the solenoid failing, or the clutch is stuck. Will...
My LMTV radiator fan is stuck in the "engaged" setting, not sure where to begin troubleshooting so hopefully I can get started with a few questions for those who know these things better than I do. I'm guessing one of two things-- either the clutch is stuck or there is something borked...
For sure. I enlisted one of my old motorhead high school buddies to assist. But really all we had to do to get it home was swap out the batteries. Everything else was topped off and good to go.
We were expecting several days of prep and road trip bush fixes but it all went smooth as silk.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!