Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
That wire goes to the back side of the ground stud.
There's only one wire on l0 and it's hard to follow do to how much stuff is in there. Is it going to be inside the electric box?
And the ground rod to the frame is also correct?
All the threads talk about the neutral bond, but non of them have pictures. Is there a picture of where it is?
I just want to make sure im hooking this up correctly. I have it wired to my house panel with the interlock switch. Theres is 4 wires that go back to the generator (mep-003) The electrition was going to drive a ground rod and connect it to the ground at the frame. But Im confused about the...
I'm planning on building a shed around my generator to power my house. I'm going to have to extend the exhaust out of the shed. I was planning on having a flex pipe inline and a rain cap on top.
Is it fine to combine the two pipe into one? If so is 2.5" exhaust pipe fine?
I sent the VR to him to get tested. It tested fine. before removing it i tried disconnecting #17 on the vr. it would produce high voltage with the start switch released. going to test the cvt1 next
it will make 260 volts on its gauge, aslong as i hold the start switch. pretty much as soon as i release it, it drops down almost to nothing. wouldnt that be more so a problem with flashing the generator then it would be with the vr?
I purchased a 003 couple days ago. He had it rigged up to some commercial heaters and acs to load test it, and it seemed to be making power fine. I go to try it here and it would produce power for 10 seconds then the volt and hertz gauge will drop down just about all the way. Every time I try...