• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. mrjeffa

    m1083a1, heater fan switch

    Does anyone know how to remove heater cover, I need to see if I am getting power to the switch and check fan motor, circuit breaker is good, took out all screws on cover, removed small Allen head in fan knob. I cannot figure out how to get the cover past the other 3 knobs. There are no Allen...
  2. mrjeffa

    M1083 6x6 brake part

    Thank everyone for there information, took the brake canister off the matching trailer and used the internal parts matching the threads off the one I took off. New tire and no air leaks back on the road. I'm going to look into the part get the trailer back on the road. Again thanks. Sent from...
  3. mrjeffa

    M1083 6x6 brake part

    I have a matching trailer, and I took part out of it. I believe all it is all good. Tire is getting installed tomorrow. Wish me luck. Found a part # on broken part. Sent from my SM-S908U using Tapatalk
  4. mrjeffa

    M1083 6x6 brake part

    The new one came with everything, this is the piece the end fits into to the brake side, I bent the old housing, and it broke off 1/4 inch of the part that goes into the brake caliper side it has two rollers on the end. So it's the engagement part between the air canister and the brake system...
  5. mrjeffa

    M1083 6x6 brake part

    Does anyone know where I can purchase this rod assembly for my m1083 6x6? I purchased the new brake air chamber this is for the rear axle drivers side, I thought it would come with it, it did not, this is the piece that goes between air chamber and the brake caliper to ingauge. Air chamber...
  6. mrjeffa

    Air conditioning for a m1083

    That is what I want, found the whole system on ebay, 4800.00, only have to run the ac lines, hi pressure, and low pressure. But it comes with the end connectors. Sent from my SM-G986U using Tapatalk
  7. mrjeffa

    260 amp alternator

    Thank you for the response. Sent from my SM-G986U using Tapatalk
  8. mrjeffa

    Air conditioning for a m1083

    Got it from gp. Sent from my SM-G986U using Tapatalk
  9. mrjeffa

    Air conditioning for a m1083

    Thanks for that information, I purchased 2 pallets of sound deadening covers, I thought it was stick on, but it's thicker than expected I was expecting to put it in the truck. but end up purchasing something newer so if you know somebody that needs it have 2 pallets of it they are 40 by 40 x 48...
  10. mrjeffa

    260 amp alternator

    Ronmar, I am only doing 2 31's I believe from our conversations this is the right thing to do. Just making sure. Sent from my SM-G986U using Tapatalk
  11. mrjeffa

    Air conditioning for a m1083

    I want to put air conditioning in my 1998 m1083 6x6, what is the best option? Gen 2 upgrade running off the motor, or a back unit 24 volt, I only have heat now.
  12. mrjeffa

    Why are the splines of my MTV driveshaft dipped in plastic?? And is this too much movement??

    I live in Texas, we Run spicer here, most of the parts houses have them, napa.com, always our go too. you can get everything from them. Blue spicer we use up to 400hp, purple 400+ hp. We do alot of muddy here. Hope this helps. The other brands are new to me. I am going to check them out. Sent...
  13. mrjeffa

    260 amp alternator

    I am going tomorrow to purchase, and clean all grounds, and put battert kill switch in. Sent from my SM-G986U using Tapatalk
  14. mrjeffa

    Why are the splines of my MTV driveshaft dipped in plastic?? And is this too much movement??

    Meritor, I am not familiar with, I have always run spicer, I even have updated driver train in my polaris 1000 rzr to Spicer u joints, Sent from my SM-G986U using Tapatalk
  15. mrjeffa

    Why are the splines of my MTV driveshaft dipped in plastic?? And is this too much movement??

    That is Anti-seize, It prevents the drive shaft and the knuckle from seizing together that's why it's coated Sent from my SM-G986U using Tapatalk
  16. mrjeffa

    260 amp alternator

    Thanks for the update. Leaving 110 amp alt, Question is now, 2 d8 batteries our is thealthough, better battery option. Sent from my SM-G986U using Tapatalk
  17. mrjeffa

    New M-1083 owner. So, here we go!!

    Thanks for the info. Alternator is still working just though will I was doing all the changes see if there was a better option. Looks like not a good idea. I am just going to put new batteries in. Thanks Ronmar for the response. So is putting to d8 batteries in is ok, our is there a better...
  18. mrjeffa

    260 amp alternator

    I am wanting change out the 4 batteries on my m1083a1, to a two battery set up. Should I put in 2 d8's, our is there a better option. Also, should I upgrade to a260 vole alternator Sent from my SM-G986U using Tapatalk
  19. mrjeffa

    M1083 reliabilty as daily work truck.

    Thank you for the response. That was great information. I did get it to start. I put it inside so I can work on it. Going to take your advise, and put 2 batteries in. And take it the 4. Now I have to figure out the right two batteries to put in. I going to start this weekend Sent from my...
  20. mrjeffa

    M1083 reliabilty as daily work truck.

    Need tires, and tint now Sent from my SM-G986U using Tapatalk
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks