Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thank you all for your advice and suggestions!!
It has been a busy couple of days dealing with everything and I appreciate the response.
I have concluded that yes this machine is not what I need for I have a mixture of appliances that need the 240. And yes I’ll be running it for several weeks...
Was going to hook up the generator to my house and my AC electrician says that it needs to be 120/240 not 120/208. Storm blew through last night so this is became high priority. Something I should have done and checked already but here I am. can someone answer the question is it an easy way to...
Peter
I was hoping for something out of whack with the latest test you gave me but every one was under 1 ohms around .03 once my meter settled out on each one. So I guess that would conclude the wiring you had in question to be okay if I am thinking right.
I am going to put it on my pad and have...
Thanks Guyfang for the parts list, and explanation of the different ones.
Peapvp I defiantly understand the not knowing what my multi meter capability's are, but only have the Craftsman's version which I'm wanting to upgrade now that I have a better understanding of multi meters. I know I...
Is it wise just to leave the jumper wire in and run it that away?
I’m guessing A5 has something wrong with a connection inside. I looked online and there not readily available and seems expensive of the one I saw. Can a person have them refurbished
Well!!…!!!.. Gentlemen 🤠 although you probably have bad news for me on what probably needs replacing! I can’t help but say it feels good that the machine fired off and ran up to rpm and produced 60hz like she is new!! I hooked a heater up to outlets everything seems to be operating normally no...
Good Afternoon
sounds like you guys are from the ole school and been there done that and forgot more than ill ever know as a few ole timers have told me!!!
My ancestry comes from Germany and is on my bucket list to get there. My last name is Kaufmann and my Moms maiden is Peters so kinda full...
Yes you sent that earlier I was using it as a guide to check the #1,3 and 19 that’s when I discovered if I touched #1 with my meter tester the unit speed up rpm and went to 60hz if the S19 was in the 60hz position kinda thru me for a loop!
I will print out all the ideas and instructions and sit...
Guyfang I’ll have to double check but I am unaware of any light visible on A5 while running on 60hz that doesn’t mean it’s not.
So tomorrow I’ll get back to the project and double check for the light!
I do not need 50hz what I meant was I can fix the indifference in the range so I can advance or retard it equally from the 50hz position. Not sure if I'm explaining myself correctly but it really has no significance in this case just a observation while I was testing the range of frequency with...
By my observation I would need to fine tune the frequency so that the range would be accurate from above and below the 50hz range.
Which will be easy to do on A5
I tried sending video but couldn’t seem to figure out how to get it to load
But this is what the results from your questions
Yes R2 has worked in past and works now.
If S12 is set on 60hz the reading on Meter gauge is in the 50hz side and yes when turning r2 it will go as high as 51.5 and...
Ok thanks! I feel like I have the correct grasp on everything and appreciate the answer even if Yall probably have repeated them several times.
Yes I originally asked about the conversion and had it turned around from what I was reading earlier on which system to switch to if had problems with...
Yes sir I do to an extent. I’m guess you ask that because of my question about the different parts.
I do realize that the frequency is separate from the voltage but was just double checking on if it made a difference with them being separate in the terms of manufacture. Namely I’m not sure if...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!