Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hey Matt.
Looks like you need the impeller as called out in the TM. Item #23. That part will connect the engine flywheel to the coupling plate. Try Saturn.
This stuff isn't cheap either. If doing a large tank, it would be more cost effective to have a company like 'Gas Tank Renew' line it for you.
Caswell Inc. - Epoxy Gas Tank Sealer
Thought I'd pass along a fix for fuel logged float problems so that it may save someone else some frustration.
I put a new 4a032 crate engine on an mep-016 genset and it ran fine, for about a week. I started having problems with the engine flooding after start up. I removed the bowl on the carb...
I like driving with the doors off when it's hot. They are heavy though, so it's not something you want to be taking on and off often. Remove the doors and put the door pins (bolts) back in to hold the mirrors in place.
I had the same issue with convoy light poles. I made some 'spacers' to move the poles out just enough to allow the top to pull down inbetween. I don't see why it wouldn't work for m66 poles?
Home from vacation and just read this. At a loss for words with a hollow feeling in the pit of my stomach. My deepest condolences and prayers to James' family, friends, and wife, Cheri. May God give you the strength, comfort, and hope, to persevere through your tragic loss. Have faith that you...
It all looks to be in nice solid condition. Any chance it's a 5t multifuel engine they put in the truck? I'm not an expert on how to tell the difference other than the starter location.
This wrangler had tow hooks. We removed them and mounted shackle mounts from an M151. The fog lights were relocated. The medium tow bar worked perfectly. The jeep has been towed many times this way since. I have a set of magnetic mount lights with 24v bulbs in them and a harness made up to plug...
Sediment may be plugging drain. Pull the filter canister and clean out. Use air to blow out the drain to be sure it's clean. Put in a new filter and canister seal. Replace the o'ring on the center bolt and make sure the square washer is flat and properly positioned.
You do not know the history...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!