Search results

Hey Guy, I did download the TM and look this because what is missing is the handle. So I thought if I could find the parts in the TM maybe I could fabricate something that would work. After reading through the TM I came to the conclusion that it might just be easier to replace the whole thing...

I’m looking for the bottom half of an enclosure door panel. The one I have missing is the lower half of the driver side, (RIGHT) rear portion on the Mep004a utility enclosure. (ITEM # 22) If anyone has a scrap unit please let me know. Thanks

Hello, I need a replacement jack for the front landing gear on a 200A1 trailer. Thanks.

Hey Scooby, I read through the thread you mentioned and I’m fairly certain I can handle the conversion. I have used the sx460 regulator in the past on some onan equipment. So my initial thought would be to use it here as well. Is there any specific reason folks are using the advr-054 instead of...

Ok I’ll check this out. Thanks. I’ve been reading another me a different member was going. It looked like he used a new regulator and then replaced the entire control panel. Looked very interesting too.

Yeah that’s kind of what I figured. I’ll be looking forward to those notes you mentioned about modernizing the AVR on your machine. Thanks

Hello again, ok picked up this machine and worked out a fuel pump issue. Engine runs good now and the unit is producing electricity. 130vac fro L1,L2,and L3 to L0. The 208vac measures 225vac to 230vac. Voltage adjust on control panel does nothing. I haven’t loaded it at all. I did find this box...

Awesome, thank you. I’ll be looking forward to that.

It seems to be running just fine with the one pump. The electrical is a bit of another story. I’m not sure if starting a new thread regarding the voltage regulator is better than getting into it here. While I’m on that subject, I have some trailer parts I don’t need either. If someone needs...

I’m considering converting it to a 12v pump with a 24v relay. The 12v pumps are more cost effective from what I have seen.

I’m going to try and get away with running one pump for now. Thank you.

Yeah, for sure it’s a goner. Here’s what I did, I heated it up pretty good with a heat gun while I was hitting the mounting plate with an air hammer to send some shock thru it. It’s freed up and moving now. Thanks guys!

Hello again, back on this MEP004a again. I recently picked this up and it has been sitting for a long time from the looks of it. Anyway as I try to bring it back to life I find that the fuel pump doesn’t work. With the run switch in run and the battle short switch on I measure 24 volts to the...

Thanks for the info!

Hello, just acquired an Mep004a and it is missing the bottom half of the access panel on the electrical connection side. This is the door that covers the main lugs.Im hoping someone here can help me locate one. I’m in Southern California. Thanks everyone!