Search results

Small world Jeepsinker. my rig is also a 1969 Kaiser Jeep M35a2 w/winch & a ten foot power angle snow plow that detaches with 4 pins & allows use of winch when attached. Still looking for that rear window. Thanks

Great idea. Thank you. I do prefer to keep it Military.

To : Flyingvan911 & everyone else- I have been looking for two years for a "a damaged/rusted out hardtop with a good window.". Best I could find junker was too much $. $500 project for a rear window? ( + shipping) Have tried usual part sources - all dozen of them. I am going to look...

Thanks to all, John S-B, Jeepsinker, etc. In my case indeed rust is the only thing holding it in place. Since my M35A2 is bobbed, I am not concerned about originality. I will try & use your ideas, do some cutting and install a sliding window from a pick up truck. I will post details on...

understood. thank you. I will watch dates with more care. But I still have not found a cheap way to get rid of the air-motors for the windshield wipers. I tried 24 vdc motors from a jeep website - but they were too weak. My 10 foot power angle plow is working great. Sorry if I have caused...

Reply for SoundGuy, The pics are worth 1000 words as they say.... My install still looks the same as the day I posted pics on 11/15/2011 - and I have logged many hours of hard use. I can only guess at two causes for the condition in your pics: 1) As discussed- could have benifitted from...

Reply to SoundGuy RE: Paint prep Thanks for reply as it may help others. Your intent was good and your effort at paint prep was excellent. Unfortunately I have found that many carb cleaners actually contain some form of petrolium distilates ( enemy of paint adheasion). I do love carb...

Reply to SoundGuy: I am glad seem as pleased with the set up as I am. I have been running it hard for weeks now and am still entirely pleased. But I am puzzled about your "paint failure". We used the exact same paint and mine has held up perfectly under extreme usage....(?) All I can think of...

In reply to Heavysteven: I may have used the incorrect term for "Military block heater". If so please excuse me. It is a heating element ( looks like one from a domestic electric water heater). The unit fits into the multi fuel engine block water jacket and plugs into 120 V.A.C. Eastern...

Well I am not a scientist with a Decible meter - But I think saying 1/3 for sure and closer to 1/2. More than 1/2 at idle and less than 1/3 at full open throttle... That is why I get no preformance drop! The Moroso unit is not a "glass pack" straight through muffler". I is actually pretty...

Addressing islandguydon: As I have said previously, everyone has their own preferences. I am pretty sure the larger muffler IS quieter - it looks like it should be... But it was important to me that I retain a "stock" look. I reached a compromise that worked for me. That is not to say it...

Thanks for the fast reply! I thought so - I figured I probably would have th buy the frame & glass as a unit. Question is: Do you know anyone selling? Since my glass is good , my other option is to use about 3 tubes of silicone caulk around the perimeter untill I find a replacement...

I am new to "posting" so I hope errors will be overlooked... I agree with"joec" that the JATONKA setup is good. I live in northern Maine and plow with my Deuce. 1967 multi fuel turbo diesel. I have no cold ( and I mean COLD - like minus 20) starting problems. My procedure is an ass pain but...

I am "new" to this "posting" thing so please excuse me. I am looking for a rear window for my hard top M35A2. My glass is good - but the frame is rusted to heck. I have had no luck searching for replacement. Any ideas or leads ....? Thank you

If Pictures of any particular details would help anyone - just clearly ask for what would help.

That is not what I did. I did not do anything as difficult as that! My install is a complete "bolt-on"! The muffler has a "big" end & a "small" end. I cut the "J" pipe and slid in the muffler's big end over it & installed clamp #1. Then I installed the Napa connector ( see my posts above for...

As Requested - Here are some pictures of my muffler install. Worthy of note: removed all labels from exhaust hardware, wiped down with acetone and pre-painted prior to install. also note lowest clamp is perpendicular to truck body. This prevents interference with vent door. Higher clamp is...

Project Results Reporting results of muffler install on my multi fuel turbo Deuce: Parts: From Jeggs ( great prices & free shipping) Moroso 94052 muffler $50 Duplicolor DAP 1690 paint $7 From local Napa store Weather cap 703-3570 $12...

The paint is Jegg's part number: 318-DAP1690. It is a spray can. Jegg's refers to it as a "self-etching primer". The Jeggs Tech department Assures me the paint can withstand the temp. of this application - and they will stand behind this use of the product. I have yet to apply the paint myself...

I am new to posting. I have tried to help in the past & been jumped on by others. I thought I might give it one more try and share the results of my experiance. If anyone has a "problem" - Please keep comments constructive. I wanted to put a muffler on my multi fuel turbo deuce and keep it...