Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Dads truck has no brakes. Worked fine then got in it and the pedal goes straight to the floor. Found a leak somewhere on the master cylinder, has plenty of air pressure. Even with the master cylinder full no brakes.
Any ideas?
pulled mine sunday.full pull is 315 feet pulled the semi's sled 351.1 feet.stock truck,little more fuel.stock tires and pressure.flagman said the fron wheels came up of the ground at the end
http://www.steelsoldiers.com/attachment.php?attachmentid=265944&stc=1&d=1312420170
Well i checked that little wire no voltage.I traced it back to the switch and here the wires were plugged in wrong.Put them in according to the TM and now nothing works.So I am assuming the switch is bad.
I just checked the ground wire it checked at 0ohms.I tested the generator with the truck running and it measured 23.8 volts.so I am guessing this is a bad one too.
My trucks new batterys keep going dead so i checked the charging system and its only showing 23.8 volts at the batterys.My dads truck shows 27.9 volts at idle.Is this likey the voltage regulator? if so could someone tell me where to find this thing, cuz its not on the firewall.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!