Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I installed a Stebel Nautilus Compact Motorcycle Air Horn few years ago cause my daughter said for such a big truck the horn was kinda wimpy this one put a smile on her face so much so that all my current vehicles have one hope this helps.
I have followed a few offroad recovery crews on you tube for the last three years. they use these winches. They rarely use them as you are supposed to and they seem to take the beating and keep on working. I have one and have had no complaints.
i installed the aux tank a few years ago from my old 81 chevrolet 3/4ton as well as the wiring,switch and valve. no issues since 81 on the first truck it was in and none in the cucv since.
the way it is wired has been working for a long time. it is now acting exactly like the card has failed and is not operating the relay as it used to so maybe something burnt on card circuitry or crossed up frankly the cards are the weak link in that system. if it is crossed up somewhere removing...
usmcpatriot
remove the glow plug card, operate system as you always have, report back or bring it by the house and i'll take a look at it. I had a similar issue when my card went. I removed card and all was fine, since you have a manual glow plug push button, the only thing you will lose is...
self tappers will penetrate the bumper and there should be an adapter for your wiring for four way flat trailer connection and you would need to add the brake/ aux power wires yourself as well as a 7 way rv style plug if needed.
lately I have been having a slight issue with my brake pedal, it randomly gets really stiff to depress while driving and will stay that way until I turn the truck off but then it goes back to normal and will stay that way until it randomly does it again. could be 100 miles down the road or two...
fyi the lmc bed bolt kit falls short on the 2 bolts going thru the entire frame and spring hanger they come barely flush not enough to get a nut on.
just installed a gooseneck hitch in my truck making it necessary to remove bed bolts ordered kit from them and 6 out of 8 were fine used...
no need to go to the trouble I have measurements for the locations to install the lights just wanted the install sheet and template since I have never seen it after tons of researching for it.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!