Search results

In!!!

Welcome from western OK!!

If you are putting a new cable in the old housing there is probably a blob of old grease that still allows the new cable to slide into place. But when it is rotating the hardened blob of grease binds up the new cable and it will snap. I have seen it break the square ends as well. Clean the...

Try adding some Power Service in the gray bottle. Don't be afraid to pour it in on the heavy side of recommended rate. Easy to see if it helps!

You can also crack the transmission case by being in low range transfer case and hard pull in reverse.

Did they order NBH 7996?

I would call them and check on the core returns. Might be better than emailing them. good luck!

The M1008 and M1009 both came with 2 isolated ground alternators. This cut down on parts inventory if all alike. I have kept all of mine just like that. Some have put the regular Cadillac alternator on the side that does not have to be isolated ground. Sounds like yours is this way. Choice is...

It could be the bulb sockets have the broken ground tab. This is common.

I agree moly is for extreme pressure. Do not use it in any bearing! It will take out a bearing!!

Pull the release inside the cab for the hood, then go up front and hit it with the side of your hand making a fist right in front of latch. It should release and then you can open it. Now clean all dirt and rust everywhere in this latch and oil it good. Do the same thing to the hood hinges. it...

You are asking for 1984 year model without AC for that heater core?

Did it leak when you first got it?

I think they wanted the lower 4-low ratio because of the lack of power from the 6.2!! Better for cross country adverse conditions.

Where in Texas is truck located?

In for the WIN!!

I used Wagner #552 Heavy Duty made in USA flashers! They may be hard to find now!

Looks like standard differential to me with 4.56 gears.

What about the hose you didn't replace?

I had this problem several years ago. Truck was running, blower motor on high. Truck died and would not start. Blower motor would not work. Fusible link coming from 12 volt diamond in center of firewall was blown, but looked fine. Had to pull on it pretty hard for it to come apart. This 12 volt...