Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
When i repower something I ocasionally end up needing a very long, odd shaged radiater hose. I make up some shrpe corners by using copper plumbing fittings. then connect them with the proper lenght of radiater hose.
it may work for you.
I have a M37 with a 5.9 Cummins and 75 Plymouth Duster...
Just to stir the pot a little.
When you replace the master cylinder you need to keep in mind the ratio of the master cylinde dipacemnet per stroke to the wheel cylinder volumn needed. ( cylinder bore diameter )
I found that out when I replaced the master with one that was too small. I thought...
I know what you mean about DMV people. ( in Minnesota too)I had a real frankenstien on my first trip to get an M37 title last fall. Then on my followup trip I got a different guy and he actually appolagized for the first guy's treatment of me. Things proceeded as smooth as could be with him...
Dozer1.
It will have to wait a few months before I do anything with the XM211. I have an experimental Biplane that needs some work.
Then there is firewood to cut for next year.( Minnesota, you know) I get half of my house heat from wood. 18,000 lbs of wood a year. :(
Ray
I know that this isn't the axact place for this, but Dozer1 asked about it here.
I bought the 1952 XM211 without winch for $600. The other one was a 1953 XM211 with winch, went for $900. Neither were running. The body on mine is excelent but most were attracted to the one with the winch. The...
I just finnished putting an M37 body onto a 90 Dodge 3/4 ton chassis w/ Cummins 6bt. The problem with putting the M37 body onto most civy frames is the frame height and kickup under the cab and over the rear axel. This force the body to "lifted" about 6'. you may like the look or may not.
also...
Joe,
I have the wedge shaped spacer for the cable plug, if you need it.
I took the engine temp sender off and cleaned it up. I looks Ok.
I'll try hooking an Ohm meter to it tomorrow while heating it up to see if it might work.
Ray
I looked at STS,s M37 and see no differences from mine. I guess that it's just a mater of minor variations.
ZAK, when I reskinned the cowl, I went right over the original sheet metal. then I drilled the winshield pivot holes from the inside, using the old holes as a guide.
The new cowl is now...
Hi All
I'm doing a restore / conversion on a 63 M37 and am having a problem.
I'm reinstalling the door glass and the gap between the front of the glass and the windshield is about 3/4" narrower at the top than at the bottum of the windows, Even after using all of the adjustments in the window...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!