Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I posted a question about a problem with my blinker not working on opposite sides of the truck ( Front driver and rear passenger) on my deuce. I was told to check my grounds, but that was not it. I bought a new signal control module on ebay for 30.00. That was the solution. I also bought new...
RE: Ground is good
OK, we switched bulbs with the other lights. All the bulbs are good. The wierd thing is that both the front driver and rear passenger blinkers went out at the same time. We will try to ground with a new wire to see. Thnks for the help. I will post the results tomorrow.
Ground is good
I checked ground, and it is good as well. Im stumped. Everything is clean, dry and in tip top shape. Running lights and blackout lights work fine. Any other ideas?
Greetings. It has been a while since I posted anything. All the responses have been great. I have a new issue that I cannot figure out. My passenger rear blinker is not working, nor is my driver front. Both bulbs are good, and the meter shows that there is flashing power, yet the blinkers...
the diesel heater in the box of my m185A3 is leaking when I drive it around. We have had it totally reconditioned, and it worked fine for a while, but will not start any more. now its leaking. Ideas?
Low Range High Range Problems: The Transmission will not stay in High Range. As I drive down the road it will slip out and i haft to stop and pull the lever up to high and then i can start moveing again. Dose anyone know how to fix this problem?
______________________________
Mark Peltier...
I have had very good success with mixing wvo into my tank. My FDC is bypassed. So far, my mixture is 15%. I got two sources for wvo. I filter it twice through a 10 micron filter. I have had no problems starting in cold weather. I also added some naptha to the wvo when heating the last...
Hi My brother and I bought the processing machine for filtering the veggie oil. My question is, can I run it in my duece if the multifuel is bypassed? If so, can I mix with diesel, and since I currently dont heat my tank, should I not even attempt? Help please
I have an AM General M185A3. It has a Hercules engine that was put in in 1992. The multifuel component is not the same as it appears in the 34P manual. The multifuel was bypassed by previous owner, and am unsure how to hook it up properly. Can anyone help?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!