• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 212sparky

    Haspin 2023

    Luke and I hope to make it this year, I won't have the deuce with me but will be camping in the 105 trailer. Sent from my SM-N960U using Tapatalk
  2. 212sparky

    Mep004A no crank, no fuel pump

    Also check all grounds. I had issues with a few small grounds not making good circuits and it did not want to start. Sent from my SM-N960U using Tapatalk
  3. 212sparky

    Mep004A no crank, no fuel pump

    Check the speed switch below the air cleaner. It has normally open and closed contacts that interlock with several different systems. Sent from my SM-N960U using Tapatalk
  4. 212sparky

    Transfer switch MEP-803a

    I have manual transfer switch that feeds a panel with just my loads I want backed up. Sent from my SM-N960U using Tapatalk
  5. 212sparky

    MEP-003 - Not engaging Starter

    Is it starter solenoid on the starter that engages the bendix and sends power to the motor that is the problem or the fuel shut off? Sent from my SM-N960U using Tapatalk
  6. 212sparky

    2021 Haspin, June 23rd -27th

    It is looking like I won't be able to to make it to this one. I hope to make it to the fall get together. New job, wife's work going crazy just can't get the time off. [emoji22] Sent from my SM-N960U using Tapatalk
  7. 212sparky

    Connecting 2-200 amp panels

    The best, safest and code compliant way would be run a cable from the gen set to an interlock in both panels. Or create an emergency panel that has a transfer switch and you move your loads you need powered into that panel. Sent from my SM-N960U using Tapatalk
  8. 212sparky

    2021 Haspin, June 23rd -27th

    It is going on the calendar. Sent from my SM-N960U using Tapatalk
  9. 212sparky

    Haspin 2020 Fall get together

    What time are you guys going to be arriving? I am shooting to try to be there before noon. I am gling to try to get the shelter in the bottom of the campground or the big concrete structure so we have a place to get together. Can't wait to see everyone and meet the newer people. Sent from my...
  10. 212sparky

    Haspin 2020 Fall get together

    Is there any special sign in process for haspin? Sent from my SM-N960U using Tapatalk
  11. 212sparky

    What is a good mobile set up for using my MEP 803A

    I have them spray painted because I don't trust tape. The interconnect cables have colored ends as well. I am the only one that hooks them up and I put tape on them once they are connected and zip ties to keep curious people from messing with them. Sent from my SM-N960U using Tapatalk
  12. 212sparky

    What is a good mobile set up for using my MEP 803A

    I used to power the haspin spring rally, I could have power laid out in 3 hours and picked back up in 2 hours. It is modular and comes on handy. I use parts of it to power my Christmas lights as well. Last I checked I have over 7,000 feet of so cord sets in my inventory. Sent from my SM-N960U...
  13. 212sparky

    What is a good mobile set up for using my MEP 803A

    Here is my set up on my mep004, I have cam lock cables and a 30 amp 120/208 1 phase feed off the unit. I have 1 panel with 4 branch plugs and a rv connector for small outings. If it is a big gathering I have the cam lock cables that feed a 3 phase panel and can spider out to the smaller panels...
  14. 212sparky

    MEP-803A 24v reference while the engine is on

    He wants to open the relay controling the battery charger lines when the engine is running. Sent from my SM-N960U using Tapatalk
  15. 212sparky

    Converting 416v output to 480v output

    Are you able to reconnect it for 208 then get a commercially available transformer to go from 208 to 480? I know you can do buck boost but they can get pricy for for large units. Sent from my SM-N960U using Tapatalk
  16. 212sparky

    MEP-803A 24v reference while the engine is on

    Are you able to tap off of the shut down solenoid wiring to power your relay? That way when it is energized to run the engine the relay is tripped? Sent from my SM-N960U using Tapatalk
  17. 212sparky

    Converting 416v output to 480v output

    What series unit do you have? Sent from my SM-N960U using Tapatalk
  18. 212sparky

    Haspin 2020 Fall get together

    If anyone is looking for wire rope for their winch, let me know. I have 1/2 inch and 9/16" steel core wire rope. Also if you want your winch line lubed i have a few different lubes i can bring. Sent from my SM-N960U using Tapatalk
  19. 212sparky

    Haspin 2020 Fall get together

    I plan to take the deuce on some trails. Sent from my SM-N960U using Tapatalk
  20. 212sparky

    What is a good mobile set up for using my MEP 803A

    I have an mep004a and what I have done is mount a 100 amp 3r panel to a moving dolly so it is portable. Then have plugs on the side that drop cords plug in to spread out the power. I am out of town and get home Tuesday and can post pictures then. I have used this set up at a few haspin rallys...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks