Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
@ 85 bucks,said if that was not the problem,he would help troubleshoot ,real decent people,Family run operation... Knapek's ...26 west 4th street ,Eureka,Ca.95501...(707)442-8774....nice shop ,old school test equipment, tested my alternator right in front of me as soon as I came in the...
you were right again,I had a guy rebuild it for me ,did a real nice job ,I havent rebuilt an alternator in years and years, he cleaned it in a viberatory cleaner. the bearings wouldnt even turn,and I guess the diode was shot,I ordered another rebuild kit from Florida,he has better quality parts...
I ll try that first ,I allready have the kit from the place you recomemded in Florida,at first the GEN 1 light came on ,but then it didnt come on, and when I turned the truck off the idiot lights all came on,but very dimmly,so I undid both batteries,the heat was from backwards electricity,not...
hoping for a little help ,went to start my m-1008,didnt seem like amp gauge needle was going up enough,not to the top of the green ,no smell in the truck ,opened hood and there was a electrical smell,I think the smell was coming from GEN 1. tried to touch alternator and it was very hot to the...
someone I know was snatching a stuck truck,they used a cable,it snapped,brand new truck,big dent in the roof,broken windshield ,ruined hood,where do you go from there!
I would not use Barrs leak,thats the stuff that gives you problems later,I like alumaseal,or silver seal, but I would only use a little bit ,I never use the whole tube ,everybody is right ,fix it right ,but alumaseal will get you home,I put a little pinch in my radiator everyonce in a while just...
the stock rims are consideribly more stout than civy rims ,I would not trade my stock rims for nothin'! Mastercraft are made by cooper,I had them on one of my m1008's,nothing special,I never liked Coopers anyway,I like Michelin ,and Wranglers,Im using Maxxis Big horns,nothin special either,from...
normaly its the protection diode that burns up ,if it gets past there its usualy the transistor that pops,some ,most likely, cant be fixed and some its hard to figure out what the problem is ,cold solder joint and the alike. For fire protection I would buy a new board once you know you've fixed...
thanks doghead,it was the small ones I was worried about,I know red on top, 3 orange wires on the bottom,I just wanted to make sure I didnt get the two small ones mixed up,I changed styles of GPR's,I knew it went on horizontal,but not sure which direction it pointed,plus my brain can understand...
would a couple of you post some pictures of your glowplug relay,I swapped mine out but now Im not sure I wired it correctly,I looked through the tm's,and they did not answer my question because you cant tell what dirrection the relay is pointed,Im changing types,mine had the original,now Im...
I have DS damage and a number of small forklift dents,and a whoping dent where the antenna mount got smashed flat and left a good sized dent,and marks from pushing the front of it with the fork lift,I always thought why dont they remove the driveshaft and throw it in the back or Build a jig that...
yea ,saw that seems to be confusion as to 70,000 or 88,000, I read 53,000 on the first contract,and possibly another contract for another 53,000,Id still like to know the brakedown ,thanks