Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
My 1984 M1009 is at my local repair shop which my friend is the owner. I have put two sets of glow plugs and a new controller and the plugs keep burning up. He told me that all of the glow plugs are showing 24 volts is this correct? What could be the problem.
I went to Lowes and got a roll of insulation its silver in color comes and different lengths. It was pretty inexpensive and I done the whole floor of the cab area for about 25.00. At the seems I used HVAC tape and then I covered it with a rubber floor mat that I bought offline. What a difference...
Well after about a month of setting I finally got my M1009 running. I replaced the rubber fuel lines coming out of the tank which fixed my leak. A friend of mine fixed the rest which included a new starter, glow plug relay, running the hot wire to the glow plug (which wass hooked to tadlight)...
HELP!! My 1984 is not getting fuel for some reason. When I bleed the line at the fuel filter it has alot of air in it. Also I have noticed about a week before this started I was leaking fuel. Since the Blazer decided it did not want to start anymore it has been leaking even more. I have never...
I have replaced all the glow plug still have no volts at any of the wires. Replaced the soleniod beside the master cylinder and the red wire on the top is the only hot wire when I turn it over none of the other wires get hot. Also the WAIT light on the dash does not come on.
I have a 1984 M1009. I am having trouble to get the thing to start. I replaced the solenoid next to the master cylinder. I have power at the top red wire but the other 3 are not showing anything. Can some please tell me how to go about fixing this problem. Thanks
I had a 1988 CUCV that I painted with GCI Paint. I bought it from Army Jeep Parts Inc. I bought 2 gallons just to make sure I have enuff. I used just over a gallon. Total price was around $120.00 with shipping. Great people check them out.
Army Jeep Parts Inc. Home page.
I have a 1984 M1009 I have replaced the glow plugs with new ones and it still will not start. I have tested to see if I any volts at the glow plugs and I am not showing any. Anyone have any ideas?
I have a 1984 M1009 Blazer I have just replaced the old glow plugs with new ones. Before I done this the WAIT light on the dash never came on had to use starting fluid to start the Blazer. Since replacing the glow plugs I still can not get the WAIT light to come on. Also I am unable to hear the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!