• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    I think its time for a head gasket replacement.

    I'm sure it's not the slobber tube. It's running down the side of the engine. The slobber tube hangs lower than the top of the front axle and the oil is dripping onto the top of the axle where the drive shaft comes in.
  2. R

    I think its time for a head gasket replacement.

    it was weeping before. The block was damp. Now its running down the block and dripping on to the front axle after 30 minutes of idle. Thanks for the links to the special tools. I anticipated the heads would be heavy. Thanks.
  3. R

    I think its time for a head gasket replacement.

    So I found oil leaking from under the intake and exhaust manifold. I can only assume its the head gasket. The valve covers are not leaking. I downloaded the tm and printed the entire section needed. I'll be ordering the gaskets shortly listed on the supplies list in the beginning of the section...
  4. R

    First parade for my deuce.

    My wife owns a Taekwondo studio. Instead of building a float, we decided on this.
  5. R

    RPM vs Speed vs Tire size

    I don't take mine over 2400 rpms. About 52 mph. Stock drive train. They engineered it this way and it works. Not changing it. I'll get there when I get there.
  6. R

    What did you do to your deuce this week?

    I replaced my water pump and housing after the break down last week. Tightened the air compressor belt. Topped off the fuel tank right before the storm hits. Ready to go.
  7. R

    Deuce broke down today

    Got a hold of the surplus company I am getting the water pump from. Getting the housing used for 75.00. Not taking any chances. Thanks again for the input everyone. Chad.
  8. R

    Deuce broke down today

    Wow this site has a plethora of knowledge. Thanks guys.
  9. R

    Deuce broke down today

    Thanks. It is cast iron. Off to the TM's
  10. R

    Deuce broke down today

    Update on the water pump. I ordered the new one and removed the old one today. The bearings came out in many many pieces. No biggie. The problem is the housing the water pump sits in has a ring in it that the impeller sits close to got hit. It was ground down a little bit but not much. How...
  11. R

    Jerry Can Carrier

    Ground Pounder Fab eBay Store About My Store Here is a link to a buddy of mine that has a fab shop. He makes them too. I got one made out of 3/16 mild steel. He has a cnc plasma table and a 100,000 lb press break. They are top notch. I don't know the price off hand.
  12. R

    Deuce broke down today

    That's what I was thinking. I didn't know if they made one or not.
  13. R

    Deuce broke down today

    To start with, I have a 71 m35 a 2 w/w. multifuel.So I was on my way home from my buddy's shop today and I heard a noise that sounded like metal on metal. I was inconsistent. Not wind, not rotating, not bounce induced. Finally it got worse and I pulled over. The water pump pulley was roaming...
  14. R

    marker lights dont work

    Hmm. It looks like I need to recheck the trailer plugs and see whats going on there.
  15. R

    marker lights dont work

    I was checking voltage at the trailer wiring plug to see which pins were used for left, right, and brakes. I was getting 12 volts there. I didn't check voltage at the light bulbs.
  16. R

    marker lights dont work

    Thanks so much. I was hoping I wasn't going to be beat down for the newb question. You guys are the best.
  17. R

    marker lights dont work

    I bought my Deuce a few months ago. When I bought it everything worked fine. Randomly the front running lights stopped working whether the head lamps were on or not. However the turn signals do work. I have been prodding around with my volt meter and found that most of the lamps are 12 volt and...
  18. R

    winch problem

    great thanks.
  19. R

    winch problem

    So I think my search function is broken. I have a leak in my winch and was wondering if there is a gasket kit for it or do I just use RTV when rebuilding it. Also searching TM's.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks