Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
My problem is cosmetic, don't mind it being there. Its the fact that there are a dozen white thhn 12 awg wires that are confusing the hell outta me. I know that some are for the governor controlling the pto gen. In regards to the other ones im guessing REDO for a screwup! Looks like I gotta...
I was wondering, if I could simplify things by removing the circuit used by the STE/ICE-R?
Or would I be causing more problems than its worth? Whats your thoughts? Has any one done this?
Thank you!
HB
Sry folks, But I have been searching for the Ohm value for the big resistors on the fire wall.
I thought I had seen it posted here somewhere B 4 Just can't seem to locate it again!
I have mine out of the truck and tested it @ ~.2 to .5 Ohms (sry cheap meter). The wires were cut on both sides of...
First off, does it matter which side of the motor the alts are placed?
The shop where I had them rebuilt blasted the cases and my scribe lines are gone.
I know should have used a cntr punch!
Also the belts were not on the truck, and from the TM's I can't tell. My guess is
right side/pass to...
My truck has a vice mounted to the tail gate and two movable HD light fixture's with 300 watt flood lights plus a yellow trouble bubble mounted front center of the box. That was my bonus package! I have 29k miles on my truck with only minor rust on the hood, and my bid won @ $3350. All in all I...
http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=17189&postdays=0&postorder=asc&highlight=pto&start=20
A fella named smokeydod posted second page of this thread hope that helps!
Nice 1031 ArmyMan! I picked one up back in April and found a post on here somewhere stating how to operate.
Mine is not running yet needs some batts and new filters and such, but the post said "transfer case in neutral, transmission in drive or 2nd then engage PTO" also stated that putting the...
If I were to use the cheap wally world batts. What cca should I get? I was lookin at them the other day and the biggest ones they have are around 1000 cca, but they are $75 each. It doesn't get below 0 to often here, but sometimes it is in the single digits.
Any help would be appreciated!
Thx! H.B.
The alts have 100 A stamped on the casing as far as blue box havn't seen 1. The M1031 has a 45 Amp PTO driven 3 phase gen that supplies the power for the air compressor and recepticles. Why would they put the larger gens on? Its not supplying power for xtra equip. like A.C. and med equip such as...
When I got my M1031 home I had the gens tested (cooked), and rebuilt $100 ea.
The batts are fried and at the moment have not the $$ to replace. The resistors wires were cut, im guessing by the NG and what looks like a manual GP switch was rigged to the dash. I put an ohm meter on the GP's they...
Hi all! With great risk of sounding like an idiot. The batts I pulled say they were shipped Sep 2004 and in both batts the cells are all submerged. I also have a dual voltage 6/12 multi-amp 2/40/250 for the 12V side. Here's the idiot part! I have tried to charge them @ 2 amps for 24 hrs they...
Glad to hear you are allright after that, minus the pucker factor! I retrieved my M1031 from Louisiana with a civi 5k lb towbar and a 10' uhaul. 1200 miles back to WV the pucker was on high alert but my Irish luck held out!
A little Irish prayer.
from HB
May the road rise up to meet you.
May...
Hi all! I apologize for lack of detail ace. It is a 1986 M1031 and medlog str8end me out.
The maintenance bed has 1990 onit I don't know if that has anything 2 do w/ it or not.
The date on the batts says sep 2004 and i believe they are shot from sitting so long.
Thanks again for your help on...
I picked my M1031 up at NG Camp Beauregard La. on the 1st of April (my 1st online auction as well as my 1st MV) so I will be bothering you good folks for some help here in the near future. My odometer is 7 digit's and has 022947.4 miles on it. I read on another thread that the 7 digi's are a...
Dual tank
Bjorn I found another thread on SS about auxiliary fuel tanks that list US sites for duel tank svo/wvo conversion.
http://www.greasecar.com/index.cfm
http://frybrid.com/
Hope this helps! Once I have my M1031 up and runin I am goin with the duel tank system. My POV 2cents this...
I wrote you a private message about the key code and i am also posting to make sure someone see's this.
Does the "B" key fit the ignition and will it work on a 1986 M1031?
La. as in louisiana dude but thanks anyway! Its a 1200 mile 1 way for me not real sure if i trust uhaul stuff to handle the trek. I read on another post that they have tow bars for the 6x6's, looking into that now.
Thank again to all! HB
EO2NMCB thx 4 the info on the key! That will save me from making things worse.
GM72K10 I had cosiderd trailering it back, Steel Soldier's lists the truck curb weight as 5200 and GL lists it as 9200 do u know which is correct? If it is 5200 lb's I will get a Uhaul and a dual axel trailer rated...