Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
On gen 2 lamp socket M1009. One side is 24 volts the other side is 12 volts
so the lamp is 12 volts in the socket
this is right with key on.
burning smell rotten eggs or wiring??
Thank you for all the help
I thing I will replace the warning lamps in the instrument cluster with instrument cluster gauges with a tach.
do you know what Hz gen 1 is, and where the Tach mod is located in the truck??
All I did was replace the brown, red, wire plug on the top gen 2
The brown wire was worn through and shorting on the motor
so I replace it.
drove into work and found gen 2 lamp was off and the 24 volt meter in truck was in the green.
new info
gen 2 is working after you start the truck and give it some fuel it starts.
battery rear 14.24 volts
battery front 14.32 volts
both 28.94 volts
so is this working right??
Ok gen 2 is working after you start the truck and give it some fuel it starts.
battery rear 14.24 volts
battery front 14.32 volts
both 18.94 volts
so is this working right??
surry
ok got 25.5 volts to brown wire Gen2
Remove the 2 pin plug from the alternators and check the voltages. Fill in the blanks.
GEN1 - drivers side
key OFF
small red wire – 12.73 volts
small brown wire - 0 volts
Key ON
small red wire – 12.73 volts
small brown wire – 12.73 volts
GEN2 -...
ok got 25.5 volts to brown wire Gen2
Remove the 2 pin plug from the alternators and check the voltages. Fill in the blanks.
GEN1 - drivers side
key OFF
small red wire – 12.73 volts
small brown wire - 0 volts
Key ON
small red wire – 12.73 volts
small brown wire – 12.73 volts
GEN2 - passenger...
Do both GEN lights come on when you turn the key to RUN?
YES
In you first sentence, where were you getting the 12.5v reading from?
Brown wire Gen2 from 2 wire plug
Is you truck wiring bone stock or has it been modified?
I do not know TM wiring looks right.
Remove the 2 pin plug from the...
aua please help have M1009. Gen 2 light is on went running. Did the test 24.5 volts key on and off small red wire .
12.5 volts key on. no volts with key off
??? ???
battery 1 12.5volts
battery 2 12.73 volts
looking inthe TM what am I missing
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!