Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks for the reply,
So both are the same, but don't need to bother with the thin disc outer seal that goes behind the locking nuts on the front axle. :idea:
cheers:-D g
Hi all'
Just a quick n easy question, have tried searching but no joy.
Are the inner and outer hub seals same all-round back & front??
Reason for asking is i've got a few spare sets of rears (inner and outer seals) and was wondering if i've got what i need to do the fronts or not...
Try taking the square plug or the 'j' pipe out of the back of the air pack and firing a few squirts of oil in there, airing up the system and pump the pedal plenty and usually that'll do the trick.:-D
I had exactly the same problem! I bled the brakes several times and no better!!!!!:evil:
Turns out the airside of the airpak had become stuck, so i removed the J-pipe and fired a few squirts of oil into the back of the airpak, aired up the system and up came the pedal and no prob's since.:-D...
I've got brakes!!!!!
That little oiling the airpack trick worked a treat and after airing up the system gave me a pedal straight away, thanks Mark!!!!
Here's the truck in question.
No but followed the usual process of bleeding the airpack followed by furthest wheel from the master cylinder and moving my way slowly closer to the master cylinder wheel by wheel, doing all wheels.
Used a pressure bleeder, which made the job easier, but still no joy only thing left to replace...
Changed all flexi pipes and checked all wheel cylinders were ok, bled system(no leaks) but no pedal unless it was pumped and it would stay up for a while.
Changed master cylinder and no difference....
I suppose the airpack would be the next to eliminate???
I noticed that when the breather...
I'm replacing my parking brake shoes on my '67 M35-A1 and noticed the new set don't have the spring (pictured) or the casting? Are the new ones ok to fit 'as is' without the spring or is their something i'm missing? Thanks for all advice in advance.
regards
Ben
lend lease trucks
Not lend-leased to Russia, but my (FWD HAR-1) truck was lend-leased to here in the UK and Australia. None apart from one which was shipped back in the 80s have surfaced state side.