Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Friend of mine has a controller box off of a 806b that he wants to power up in order to see if the CIM is working. Does anyone know which pins he needs to attach his power leads to in order to power up the whole box or just the CIM screen ? Thanks much !
Was able to get the seat compressed and rings out. Now the trick will be to get those tiny rings back in during re-assembly. Also, want to try the " flow method " in order to time the IP. Thanks much to all who weighed in with their suggestions. I do enjoy reading so many helpful comments...
Am in the process of disassembling a M50 injection pump that mounts on a Mep 003a generator. Like others I do not have the " pressing tool " for removal of the plunger retaining rings and seat. Have seen mentioned by others a customized " socket or pipe " tool that works. See in the pump...
You would think someone would have a detailed diagram of wiring a reconnection switch. Have called and searched all over with no luck. Hate to plop down $ 500 - 600 for the complete box when I have a perfectly fine switch. Thanks for your reply.
Am in need of a detailed schematic for wiring a Reconnection Switch on a MEP 002a generator. Was able to obtain an assembly diagram of switch from Electroswitch the fine folks who built the switch. Now have it reassembled . Have looked at several TM's on the generator but none go into much...