Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
It ran perfectly before with no Problems at all.
Transfercase is in H gear. I also checked the linkages from the transfercase and the trans.
I did not Drop the pan nor checked the filter yet. Fluid on the dipstick looks perfekt.
When I Shift the trans to R or D it shifts firm in a split...
When I cleaned all the connections I had the batterys unplugged.
After that I plugged them in again and made a 5 mile test drive.
Symptoms as before, trans light flashing when the engine is running or when I drive it.
After the test drive I bridged A and E on the TCM again and no codes...
Hello Guys,
I´m currently working od a M1123 6.5 NA with the 4l80e transmission.
My problem is, that the trans seems to be stuck in limp mode.
When I turn the ignition switch to the run position, Glownox does it´s thing, Trans light is glowing.
When I start the car, the trans light starts...
Didn't think of that. The original Checkvalves were all badly rustet. That stuff needs to go somewhere...
What is the easiest way to air up the truck With shop air?
In the P2P I saw that the rear emergency gladhand goes to the Trailer push valve unter the steering wheel and would then end in...
So, the Problem didn't leave me alone....
I went back to the truck and tested some stuff. I gave Shop air to the service gladhand and didn't hear any air leaking.
Then I removed the Shop air. Started the truck up and Opened the shutoff valve to the primary tank. Primary would not buikd air as...
Took a screenshot from one of your Videos.
Red arrow: no air from the line nor the Port.
Yellow arrow: there is little air flowing from the line if I take that line off. If I hold the line shut it will build a little bit of pressure but not much. Neither secondary nor primary gauge will move...
Hi guys I´m back with another problem.
Today I tinkered with my electric a bit since somebody cut and rewired my light switch connector.
Long story short, I told my girlfriend to step on the brake pedal so I could watch the back brake lights. She stepped on it pretty hard and when she...
I put a m1982 LMTV flatbed on to my m931 truck. Needed to cut the storage boxes out for the side panels and the ladder, painted the underside and the bedside. Still need to Do the wiring.
Gesendet von meinem SM-A415F mit Tapatalk
Problem for the Constant purging Was the checkvalve going into the wet tank. It was rusted and stuck open.
Never the less, I threw out the original air dryer and replaced it with a wapco unit.
The wapco unit has a built in governor.
When the governor Kicks in at 125 psi, the dryer is purged...
Problem is that the AD9 air dryers are as good as unobtainable here in Germany. And when I need spare parts and stuff I will not get anything quick.
Do you have any other more available solution maybe?
Gesendet von meinem SM-A415F mit Tapatalk
Today I disassembled and cleaned the air dryer as much as I could. I got the old style dryer with the aluminium cooling fins body.
I'll replace it with a Wabco 1200 series dryer soon. Mesured the fitting sizes and made a list with stuff that I need for the Upgrade.
I also will replace the...
Hello Guys,
I can´t seem to figure this out by myself. I had read a bunch in the forum here and in the TM´s but im lost now.
Problem:
Truck airs up fine and quick. Horn, Wiper and so on are working. Brakes are working, Handbrake is working. Truck running fine.
It airs up to about 125...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!