Search results

I got these figured out thanks to publicenema. The one ending in 47 was from using a resetting breaker that wasnt resetting. Replaced with a fuse. The other one was because of one relay still not in place as well as a fuse. Publicenema sent me a more detailed diagram of the breaker box...

So, thanks to publicenema and the help of others on here, my MRZR is running very well. Turns out that the relay/fuse configuration diagram he first uploaded was incorrect, even though this more detailed diagram (he sent me) has the needed slots filled and is correct, and from the same manual. I...

Just ordered one. Slim chance, but hoping the engine fault codes for these machines in in it. If not, I'm sure its helpful in other ways

Hello, I recently acquired a non- running one of these units. It had a few items salvaged from it. The RF caliper, clutches and drive belt, seats, alternator, and the molle items were all gone. So far I have replaced all but the seats and debating on any molle items. So after fixing the brakes...

Second try on picture.

Here is a pic of the numbers on the actuator but they havn't been much help.

It looks as if my wastegate actuator isn't working as it should. I removed it and the wastegate itself was seized. So I got it freed up and working very smoothly. I put 5 psi of air to the actuator and nothing until I upped it to 20 psi and then it pushed out about 3/8 - 1/2". I think these...

Okay, I put the clutch kit on that duraclutch sent and got my completely new brake system together. Have two new batteries installed. It started right up with the ignition, with the brake light working now. However, it has the check engine light on (sometimes flashing for one to five blinks) and...

Very good to hear. Thank you

As for that fuel filter, I am going to take a closer look at that donaldson as that will save a lot of unnecessary work and cost as the oem one is an entire bracket and I'd have to deal with lines instead of simply changing the canister. That don't sound like my favorite option.

Hmmm. That no crank connected to no brake lights is indeed interesting and probably the problem. They robbed the rf wheel cylinder and forgot to put the cap back on the master cylinder. It had no pedal with a dangling line and I see it goes by pressure in the master cylinder to activate the...

So I got all the relays and fuses in order and the throttle pedal installed and the instrument panel lit up and it seems everything electric works except the starting system. So I unplugged the small wire going to the starter and used the heavy positive wire that is dangling (far from ground)...

No, I gave them the serial number and model and original numbers needed (that you posted). I just got my relays today and am about to work on that and see if I get anywhere on that. I want to hear it run before getting clutches but still will call and reverify first that these are applicable to...

Looks like duraclutch stepped up to the plate.

No, I havnt gotten it running yet. Waiting on the relays before I even try. I contacted duraclutch to see if maybe they make clutches of the same specs. that work for diesel, and hold up to turbo. Waiting on that response. This is an upcoming item to manufacture and sell many of so hopefully...

I do not see a way to edit. Maybe a mod can pull it down as that was my mistake

The whole thought of something major made me test the transmission. I may be off on this evaluation but in park and neutral the gearbox shaft spins free. When I put it in reverse it tries to roll backwards with just my hand spinning the shaft. Both low and high try to move the machine forward...

Thanks for the throttle pedal number. Just yesterday that same thought entered my mind, of a major issue before stripping. Especially after looking at so many govplanet sold ones photos. There were many stripped of the same parts. I still got this for $5k less than the cheapest running unit so...

One more thing...for now. They robbed my throttle pedal. Do you have access to to that number?