• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. acmunro

    Search time block?

    Yes use the search don't ask the same question over again. But be patient.
  2. acmunro

    Cracked a TH400 case and support brackets with a NP205

    I always think it is strange the CUCV trucks did not have these but the civilian trucks did.
  3. acmunro

    my new addiction M1010 build

    Looks like a good project. I would like to see the pics from your roof cap retrofit.
  4. acmunro

    Closed Auction - Chambersburg, PA vehicle loading ramps

    I would I bought a lot of 10 ramps. I should have a couple extra.
  5. acmunro

    Closed Auction - Chambersburg, PA vehicle loading ramps

    I picked up the lot I had pictured. I am not sure what they are from. They are aluminum. If they are boarding ladders they were built for elephants...
  6. acmunro

    Closed Auction - Chambersburg, PA vehicle loading ramps

    I thought it was an odd design for a vehicle ramp as GL had them listed. Now we know the truth.
  7. acmunro

    Closed Auction - Chambersburg, PA vehicle loading ramps

    Thank you. Are they steel or Aluminum ?
  8. acmunro

    Closed Auction - Chambersburg, PA vehicle loading ramps

    Hello, Did anyone preview these ramps or recognize them ? Just trying to figure out if they are steel or aluminum. Also how much weight they were designed for. Thanks in advance.
  9. acmunro

    Dual thermostat assembly on a 6.2L?

    I did on a 6.2 I installed in a 97 ex USAF crewcab. It came with the truck on the blown 6.5.
  10. acmunro

    6.5L Turbo refit

    Yes I forgot about the short injectors and lines. I really need to start writing this stuff down. I always think I will just remember. Thats not happening.
  11. acmunro

    6.5L Turbo refit

    Looks like everything is there in the picture. Not sure if the Air cleaner is included that might be helpful. The one I did I used some pipe fittings at the bell housing oil port to tee off for a oil pressure line to the Turbo. From the tee I used 3/8" stainless steel line to come up near the...
  12. acmunro

    new guy from pa

    Welcome and Merry Christmas from Brookville, PA Just down the road on I-80.
  13. acmunro

    M 1031 generator conversion to stand alone?

    I will be following this thread. I have been kicking around the idea of building a genset this way but using a Detroit Diesel 2-53 I have. I like the idea of having a quiet generator LOL.
  14. acmunro

    As close to a 4-door CUCV as I can get

    Come anytime. It might be a couple degrees cooler up here. Prob just as Humid.
  15. acmunro

    As close to a 4-door CUCV as I can get

    Looks like a couple 1990 Navy crew cab duallys I have. Looks like the same green paint. They have regular dually beds and AC.
  16. acmunro

    Empty 20' 10,000# Trailer From Brookville, PA to South Bend, IN June 29/30

    Title pretty well sums it up : Empty 20' 10,000# Trailer From Brookville, PA (15825) to South Bend, IN June 29/30 I will go off route within reason to pick up or drop off. Pulling with my Cummins 3500 Turbo Diesel. I might have some return space on my trip back from South Bend. Trying to...
  17. acmunro

    Bypassing Glow Plug Ignition Card,, and a tick.

    When I convert to push button glow plugs on the CUCV's I use a piece of circuit board (I picked mine up at Radio Shack). I put a couple contacts on the end and attach wires to the contacts. Then I run the wires to a momentary push button. Ground the other contact on the push button. Push the...
  18. acmunro

    CUCV Washer motor won't turn off

    If you disconnect the red and white wire from the pump (this is the pump action coil) and it still pumps when the wiper motor is on you prob have a problem in the new wiper motor (washer pump arm not disengaging).
  19. acmunro

    2013 VIN INFO Thread

    CARNAC, Looking for info on a M52a2 5 ton tractor. a. Serial # 952412159 b. Reg # 5E7591 c. NSN # 2320000559261 d. Purchased GL Mechanicsburg, PA e. Bumper # 1032T-110 Thank you, Allen
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks