Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
It sounds like perhaps you did do OK. I did a couple of 016's that were a mess and both of them are fine now. Just work through it one issue at at time and hopefully you'll have a sweet genset in the end.
Hi Redah,
I have a 016B that I just resolved many issues, one of which was the same as your's. The low fuel float switch was causing my circuit breaker to trip. I also had problems with the fuel cut off solenoid not pulling in and allowing the governor to work. After reverse engineering...
That's pretty awesome! Some people say the 002's and 003's are too loud, but I'm going to add a muffler to mine. Sounds like you were smart in planning and had your act together.
My 016B's alternator didn't put out enough voltage to charge the batteries. I didn't want to tear it down to replace diodes, so I added two cheap Schaumacher automatic chargers to it. They switch from 6 amps full charge to trickle to maintain. I hard wired them in and plug them into the...
It looks like the electronics for it are cheap enough. I see the bearing on the back side is behind the slip rings. Have you every changed the bearings? It looks like that could be a bit of a challenge if you had a bad bearing as well.
I haven't gotten my 002A running yet. I still have to repair the IP on that one, but my 016B won't start without a good bit of preheat. My 016D with the little Yanmar engine fires right up, no problem with or without preheat. I believe It must be the old Onan engines that need a lot of...
Haa, isn't that funny. I got an eagle can off ebay and found a guy that makes reproduction spouts. That was the best can ever made that would last forever, except for the spouts. LOL
Why do you want such a huge high output heavy generator in an RV? It seems you'd be better off getting a ONAN off craigslist that is designed for an RV. I would suspect that your friend who did a similar conversion already had all the parts and materials to do the finish the project with...
Wow, it sounds like your 003 was in a similar condition to my 016B that I recently finished repairing. That thing was loaded with extra gifts but I whipped it into submission! Good Job, hang in there. It sounds like you're getting close to getting yours back 100% too.
DieselAddict has a good suggestion. I've read where some guys with larger generator have had restrictions in the exhaust due to "wet stacking". After cleaning that out and burning out the residue, the generator performs well under full load or even 125% capacity.
Hmm, sounds like he couldn't have hurt it if he didn't try to pull any power from it yet. It sounds like it's time to break out the TM and the schematics and start tracking down the cause of some of the symptoms. I had a simple power feed connection that took down a 016D. Keep us posted on...
You're very fortunate you didn't do some serious damage to your appliances. 25% high frequency, and who knows what voltage on your 220 Volts leg to leg.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!