Search results

Thank you I found that six pin ground terminal and there were no wires going to it I did find one black wire that had come off it I reattached it..Thanks again Barrman

just jumped the ground on the relay to a good ground and it fired right up tried it a couple times that was it don't know why I didn't just think it through myself instead of bugging you all about it. Really appreciate the help though. Anyone have an Idea where that black ground goes to ground...

Sorry not really enjoying my location much these days Ill try to behave.

Yes I was seeing 8.5 on both terminals red lead of meter to terminal black to ground. I will check the grounds and if that checks out putting 12 volts to the terminal from the battery is a great idea thank you I was looking at a colored schematic trying to trace where that purple white wire goes...

Ok changed it

Once the truck is running there is no voltage on the small terminals but while trying to start I get 8.5 volts which is the problem? Should be 12 ...8.5 is not enough to charge the relay. Any idea why I would have only 8.5 ? where should I start to look? I mis spoke in the original post about...

Having a starting problem and could use some advise. I have a 1985 1028 have had it about six months with out any starting issues this weekend had nothing but clicking under the dash when trying to start. So did some reading and it looks like someone before me did the dog head relay mode on it...

It probably is illegal I cant keep up with all their B.S. Im one big red flag here no doubt.

This is my first post in this thread and I have some big time catching up to do.. This is what Ive done over the last 3 months which is about how long Ive owned my 85 1028 Replaced steering wheel with a stock one and get the horn working..It came with a Momo wheel Replaced starter bolts and...

They are in the mail on the way to me. Thanks for the help I have bought a lot of things recently from ORD and I dont know why I didnt check there first.

My transmission mounts are really in bad shape and I would like to replace them I did a google search but could not find info. I am also looking for the support rod that goes from the bell housing to the transfer case. I have a M1028 with a TH400 and a NP208 If someone could point me in the...

I just went through the same thing after reading about starter brackets I went and looked at mine no bracket then I pushed on the starter it moved a bit I wondered if there was a crack in the block so I started taking the bolts out one was broken and the other loose. Got the starter out no...

New to Diesels and CUCV"s but not new to wrenching.Very appreciative of this site. Bought this from a very good friend of mine with the promise if I ever sell it he gets first chance at it. I have had it about a month and have been very busy with it. It is a m1028 came with 37's and new wheels...