Search results

Mike I will scatter shoot here, first to the applicability of an 804A/B. either will work just fine for your needs. In reality the 803 would work well also. The 803 will make 480 Volts just fine, but near if not ALL the logic will need to be redone or made to work with the 480 output.. That...

Hi Guy. Yes I probably have a few [backplane board ] As we typically destroy these boards then put emm in the trash and get emm out of here and gone.. I will go out and look its about 5:15 PM here locally but still got some daylight, if this user thinks he needs one he can have it free, I am...

yup its ok. to get rid of it.. they are sold.. but i have more but will make a new listing for them as well a ton of other stuff . Im going to close this pop stand down.. its gotten too big both in dollar volume as well as generator size, presently i have 2 ea 500kw sets here a 200, a 300 and...

Emm the ole bad Capacitor/s situation. Normally or at least conventional logic trouble shooting tells us to look each side of this type component and see what might have caused this to fail or created the excess demand on the damaged part.. But that doesn't hold up in this situation...

Microsoft did their part and now totally done and wants no more of this, its ancient technology .. Ample workarounds or solutions exist but none are cheap... $3,000 - 5,200 depends on how cheap you wanna be .. best: mac/mc MC II

Remember this control system was designed and built in the mid 90's and Cat was the only real provider and we liked the Cat system , but guess what Cat wouldn't sell us the system unless they retained all control and parts and would not share programming . But the biggest deciding factor was...

It sure looks like what we are used to seeing, so if indeed you have all 12 of the SAME SIZE wires extending from the housing and likely 2 or 4 smaller ones you would be good to go for 120/240 but you need to verify the TOTAL number of wires from the or coming out of the stator body, but you...

You still need a sending unit.. ?? mac/mc

Jon do you still need the relays, i have a butt load of them all originals and exact replacements. let me know mac/mc in Wimberley just due north of you ..35-or so miles

at some risk of being a smart ass ?? WATER is this cause, and fresh water, not ENGINE water, so back to the idea of pressure washing or just plain ole rain water leaking in, I'd clean it up and move on ... Best: mac/mc MCII

if you're free i can call now but will have to excuse myself in 10 minutes to remove the Pumpkin bread from the oven but can then resume talking its a 5 minute task .. bread that is ..

Bit** is understated, I'm sure some word can fit this application better, but i was trying to stay gender neutral. Although WOKEism is not a real problem among this group of readers I dont sense anyhow... I know you slightly from several exchanges and i did argue with myself to use that slang...

You have verified my original or near original satements, this whole process is akin to being a female dog and is by far the most difficult of any of the MEP series sets bar none.. Not for the faint of heart and even then you're now only about 1/3 done as putting Humpty Dumpty back together...

Yah sorta the same here, WHY would you remove the batteries rather than just leave emm in place all the time.. keen to hear this reasoning.. mac/mc MCII

This response is toward 400hz possible compatibility, and not intended for Peter, he well knows the diff.. Dont even think you "SLOW" it down and make this all work, you gave the logic away when you discovered the 24 poles/winding vs for a 60hz set

Some late to the party answers and suggested causes of this 15kw set... I see about 3-5 of these every year, the cause steems or seems to be from the Ground BOND strap not being bonded to the GROUND but rather to L1 wherein this short causes a very high inrush or "forcing" of the FIELD and...

Hot stamped honey, hot stamped Kingsley make the best. a DIE for the individual wire size has an opening,, you load in you lead letters and numbers and turn on the machine and let heat up, then depending on if your're using Black or Red ribbon pull the lever down and hold for 5-10 seconds or...

Did you even try and set up the GAC speed board modual to be sure it was/is not adjusted correctly ? My experience sez this is the culprit... mac/mc

Readers, can anyone share a source like NAPA AutoZone O'rileys or such for a source of the OIL PRESSURE sending unit that is compatible with the 802/803 or 804 series gen sets. Also any help on water temp sending units, i find myself needing about 4 of each and if i can really push my luck...