• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Denvercaitland

    Mep-803a performance - power outage.

    Shell Rotella T4 15W40. Last oil change was at 2100 hrs. Now at 2300 hrs ( last 110 hrs continuous). https://youtube.com/shorts/lQk9qc_tc8k?si=1yzCksqdZctLHuER
  2. Denvercaitland

    Mep-803a performance - power outage.

    UPDATE 96 + hours and counting . Operating flawlessy and all readings within range. I'm just curious what could explain the slight variation in oil pressure ( no concern but as a learning point). TM specifies a range of 20 to 60 psi. When operating at less than 6 kw ( < 60% load)...
  3. Denvercaitland

    Mep-803a performance - power outage.

    275 liters (75 gallons) . refill as needed at local truck stop , rotate through the skidsteer.
  4. Denvercaitland

    Mep-803a performance - power outage.

    We had a rain/ wind storm on Monday which resulted in over 1500 seperate power outages initially impacting 130k customers in New Brunswick. 803 has been flawlessy powering the house for 62 hours and counting. ( we are in a rural area , likely to be another 24 to 48 hrs before power is restored)...
  5. Denvercaitland

    MEP802 Short

    Much better worded :).
  6. Denvercaitland

    MEP802 Short

    "pull the end cover off the main gen, look inside, for burn marks or damage" This is what a damaged stator would look like.
  7. Denvercaitland

    MEP802 Short

    I should add, that the set was running fine and would run at full load . The only symptom was that the 803a would randomly " bog down" as if large additional load was suddenly applied. ( That is before the S8 failure fried the stator.. and the set died :) ).
  8. Denvercaitland

    MEP802 Short

    Should it be S8 or related to S8 as mentioned above. I suggest you do a very thorough visual inspection of S8. I had a S8 failure on my 803a which led to a "fried" Stator . As you can see from the Pics , the S8 failure was not obvious with the switch in the 803a and all wires connected. Even...
  9. Denvercaitland

    MEP-802A GP Win

    Very practical indeed, load it up when needs refill. Quick connect to 803a or use pump to refill skidsteer, snow blower.
  10. Denvercaitland

    MEP-802A GP Win

    As an option for external tank. I found a used truck tank in good conditions ( 75 imp gallons). Built a cradle for it. Works well.
  11. Denvercaitland

    Mep-802a compression question

    Remove injectors and turn engine over to see what comes out of injector holes ( PS - ⚠️ - liquid in the cylinder , if any, will come out VERY forcefully. ) oil of any kind may not necessarily be bad - water would be a nightmare scenario.
  12. Denvercaitland

    Mep-802a compression question

    Jason, The fuel injectors are what , as per ray 70 suggestion, you want to remove. They are located on top of the head to the left ( If you are facingthe radiator). The injection pump (fuel pump - timing issue .... one at the time) are mid engine to the right ( arguably requiring more TM...
  13. Denvercaitland

    Mep-802a compression question

    Cheers https://www.steelsoldiers.com/threads/mep-803a-hydro-locked.199981/
  14. Denvercaitland

    Mep-802a compression question

    Highly unlikely scenario but may be worth a look. When I acquired my 803a I ran into a similar problem with turning the engine by hand. It turned out that on cylinder was hydro locked The various steps I followed and advice I received are detailed on thread : "Mep 803a hydro locked" Cheets
  15. Denvercaitland

    MEP-802A Fuel System issue.

    This is a posted video from a member which may assist you
  16. Denvercaitland

    MEP-803A Long time reader first time poster

    Been using these type for last 2 years on transfer switch to monitor output of 803a . Of course not as accurate as fluke meter, but helpful nonetheless
  17. Denvercaitland

    Can I run 12 volt LED's from a single battery on my MEP802?

    This has worked for me to power my auxiliary fuel tank pump from my 803a batteries.
  18. Denvercaitland

    How do you move your generator(s)?

    1992 surplus case 1845C
  19. Denvercaitland

    MEP803A, governor slow to react to load

    The second "exhaust stack" is for the "artic heater kit" which is an option on 802a and 803a. Basically it prewarm the engine coolant to 140°F before startup. Nice to have in colder climate 😀
Top