Search results

I managed to replace the turn signal switch without removing the steering column completely with a little aggravation and some stiff copper ground wire that I use as a witching rod with my current job as a underground utility locator. Hopefully I can do the same replacing the wiper switch. It’s...

This may have been covered before or may be a stupid question but here goes anyways. I know my 85 is built on the 84 model but the only wiper switch, the one inside the steering column, I can find with pulse wipers and without tilt is for the 85. There are differences between the 84 and 85...

Figured it out finally. Wound up being stupid simple. After spending almost 2 hours tracing wires and checking voltage on all the switches and what not, it wound up being a loose wire on the turn signal switch connector on the steering column

I’ve changed the fuse and checked all the other fuses. I put load resistors on the wiring to get the wires to make the flashers work. Tried putting the stock incandescent bulbs in and it’s the same, no brake lights. Not sure what’s meant by hot wiring the brake light switch but I already bought...

Hello all, I have a 1985 Blazer 6.2 non turbo. I recently replaced the batteries and now I have no brake lights. Tail lights and blinkers work, I replaced the switch and fuse and still nothing. Using my test light I have power to the fuse panel and power to the orange wire on the plug for the...