• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Daves86

    Members in Northern Virginia?

    What time you thinking on rolling in?
  2. Daves86

    Ongoing Log Of My 1987 HMMWV

    What TV bracket did you wind up using? Don't see it mentioned on your receipt and I wasn't able to find one that looks like the one on your ride. My googlefu is weak. Thanks
  3. Daves86

    DWF sensor location

    Look under the Passenger side behind the front tire for this The cup mounts in the holes on the bottom. The fun is running the hose from the CDR to the top of the cup Good Luck with it.
  4. Daves86

    What have you done to your HMMWV today/lately

    Finally got around to building a better back up display mount
  5. Daves86

    New Owner - Where to start?

    Welcome to the madness! Looks like you got a good list started but I would add some maintenance. Change all the fluids, flush the cooling system (may have to be done several times). The TMs are your friends (though they may not seem it at first). Enjoy!
  6. Daves86

    What have you done to your HMMWV today/lately

    So I took this to make that Used that to bend this That mounts onto my cup holder with homemade keymod To allow my new Comms box be where I can adjust it as needed This is the front two person, now I need to mount the rear panel and get the Fat 50 Storage mounts installed, Not sure where I...
  7. Daves86

    Members in Northern Virginia?

    I'm a rattle can kind of guy myself. Good luck finding a painter.
  8. Daves86

    Members in Northern Virginia?

    Very Nice!!!
  9. Daves86

    Members in Northern Virginia?

    Welcome to the madness Cliffc. What is your ride of choice? And folks here LOVE pics
  10. Daves86

    Members in Northern Virginia?

    Welcome to the madness! Nice ride. Look forward to more Pics when it shows up. Did RWH do any upgrades or just service it? Are you planning any upgrades?
  11. Daves86

    What have you done to your HMMWV today/lately

    DWF CDR Looks like this The hose on the top goes to the sensor cup and (under the truck at the A pillar pass side) the smaller goes to the fording valve. sorry its not the best pic of the whole CDR.
  12. Daves86

    Air intake removal question

    So it's a bolt that screws into a bolt wedged into a hexagon in the body I agree with Tobash, cut off the heads to remove the intake and then work on how to get the remnants out. Either way good luck.
  13. Daves86

    What have you done to your HMMWV today/lately

    Found my fuel leak. Only leaks when I fill up, now I know why Someone drilled thru the floor and into the tank near the filler neck. A 1/4 x 20 screw screwed into the hole tightly, then put some fuel resistant sealant over that. At least I got new gaskets and freshened up the fuel system...
  14. Daves86

    Temperature Gauge question

    And Check your grounds!
  15. Daves86

    Newbie Fuel System Issues

    Not saying those are the cause of your problem, just trying to help you identify what they are to assist in the troubleshooting process. I do not believe those lines are the cause of your issue. From what you have described you are thinking there could be debris in the tank, that could cause...
  16. Daves86

    Newbie Fuel System Issues

    Look like the lines that go to the deep water fording kit got cut. Do you have something like this near you fuel filter?
  17. Daves86

    M998 speedometer

    You'll know when the clamp goes on how close you are. The clamp ends drop into the quarter recesses and the bolt lines up, if not you can use the clamp to turn the pinion housing the last bit to get the bolt to go in. Enjoy the project and welcome to the madness!
  18. Daves86

    M998 speedometer

    Just went thru this same issue this week. There is an alignment indicator on the housing (Pinion Adapter) that fits into the transfer case and another mark the case. It took 4 tries for me to get it aligned. Basically if you have the orange 37 tooth gear you align the 36-38 mark to the dot...
  19. Daves86

    Humvee audio systems: What have you added / done to your rig ?

    Tried a Bluetooth setup and was disappointed with the results. Liked the idea but found the speaker I chose to have insufficient volume to overcome interior noise levels, Allowed the iphone to be my jukebox, could only hear it at a stoplight. But I would shy away from this setup because I...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks