• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. A

    Auxiliary valve leak

    Yes it leaked right away, I’m going to try a different well nut see attached, the torque that I found is 40 inch pounds let me see what happens I’ll keep you posted thank you for the response.
  2. A

    Auxiliary valve leak

    From the well nut on the fuel tank that goes to auxiliary valve.
  3. A

    Auxiliary valve leak

    May all have a HAPPY NEW YEAR! My MEP804B is back to life producing power. Now I'm having problems with the auxiliary vale leaking at the tank, I've replaced it with an aftermarket or equal EBAY tank well nut item (43 figure 15) from manual, unfraternally it still leaks! How do I install this...
  4. A

    Electronic governor control for MEP 804B

    I'm screwed up! I bought WRONG A1 I should have have got the TRC A1 attached is T1 & voltage adjustment control, I did not find S12 to find resistor. Should I buy TRC A1?
  5. A

    Electronic governor control for MEP 804B

    Thank you so much. I’ll check it and keep you posted, I did not know that 804B & 804A used either TRC or Libby Thanks again for the information
  6. A

    Electronic governor control for MEP 804B

  7. A

    Electronic governor control for MEP 804B

    I have a Libby A1. How do verify correct T1, R16, and S12? Gen set MEP 804 B I'm assuming 804B uses a Libby and the 804A uses a TRC is this correct? My apologies for my illiteracy in previous threads I get to wound up and frustrated and using my cell phone doesn't help I would appreciate any...
  8. A

    MEP804b voltage regulator

    I’m back to square one, I used a Libby VR for MEP804B can anybody help me troubleshoot the voltage regulator?
  9. A

    Electronic governor control for MEP 804B

    How do I verify?
  10. A

    Electronic governor control for MEP 804B

    It’s in the response to post number two that’s the part number I shouldn’t have to change anything I don’t know!
  11. A

    Electronic governor control for MEP 804B

    The response to thread 2
  12. A

    Electronic governor control for MEP 804B

    It was post 1&2 I unable to forward I don’t know if you can see it?
  13. A

    Electronic governor control for MEP 804B

    I went with thru this subject when I ordered it let me see if I can find it thanks
  14. A

    Electronic governor control for MEP 804B

    I’m trying to find a previous post that gave me a EBAY part number it’s in one of my posts
  15. A

    Electronic governor control for MEP 804B

  16. A

    Electronic governor control for MEP 804B

    Libby, I bought it on EBAY open box
  17. A

    Electronic governor control for MEP 804B

    I did not check for power before the relay swap, when I release S-1 I lose power and the hertz meter drops off.
  18. A

    Electronic governor control for MEP 804B

    I swapped out relays K-15 with K-14 same problem persiste although when I hold S-1 in the start position I do get 120 volt to the convinces outlet
  19. A

    Electronic governor control for MEP 804B

    I did swap out the relays K14 with K15 same problem although when I held S1 in start I do get 120 volt to the convinces outlet
  20. A

    Electronic governor control for MEP 804B

    It’s a good thing that with the unit running I can switch to start without running the starter
110,706members
165,193threads
2,324,399posts
1,350online users
Top