1078 driver door window install.

[Blairg]

Anybody have experience doing it? Went through the Tm/s to see if it was covered but couldn't find it. Window was very easy to get out after I broke it accidentally. I was a moron.

Blair

 

[TomTime]

I know you have the LMTV 4x4, but I can only tell you for the MTV is,

TECHNICAL MANUAL
MAINTENANCE INSTRUCTIONS
UNIT MAINTENANCE
M1083 SERIES, 5-TON, 6 X 6,
MEDIUM TACTICAL VEHICLES (MTV)
VOLUME NO. 4 OF 5
9-2320-366-20-4
Chapter 16 Body and Cab Maintenance
Section 16-5


EDIT: I found this. Maybe this will help.

driver door glass!!!

What do they want for it?

www.steelsoldiers.com

Got to post, #28

Good luck,
Tom.

 

[Blairg]

Thank you for that. Exactly what i needed. I need to see if I can find it in the 1078 TM's .
Blair

 

[TomTime]

M1078 TM's

Listed below are a number of the TM's for the M1078 trucks. To save them to your computer, right click, select "save as" m1078_TM 9-2320-365-10.pdf TM 9-2320-365-10 for the M1078 series trucks. m1078_TM 9-2320-365-20-1.pdf TM 9-2320-365-20-1 for the M1078 series trucks. m1078_TM...

www.steelsoldiers.com

Should be: 9-2320-365-20-4

https://www.steelsoldiers.com/upload/M1078/m1078_TM%209-2320-365-20-4.pdf

 

[GeneralDisorder]

It's easy. You just remove the inner window sweep and the weatherstripping in the glass channel and along the top edge and the window slides out to the inside edge of the channel.

 

[Blairg]

M1078 TM's

Listed below are a number of the TM's for the M1078 trucks. To save them to your computer, right click, select "save as" m1078_TM 9-2320-365-10.pdf TM 9-2320-365-10 for the M1078 series trucks. m1078_TM 9-2320-365-20-1.pdf TM 9-2320-365-20-1 for the M1078 series trucks. m1078_TM...

www.steelsoldiers.com

Should be: 9-2320-365-20-4

https://www.steelsoldiers.com/upload/M1078/m1078_TM%209-2320-365-20-4.pdf

I looked in there. Beginning to think my PDF's that i down loaded didn't download completely. Going to go through and re-download to be sure.
Thanks again!
Blair

 

[Blairg]

It's easy. You just remove the inner window sweep and the weatherstripping in the glass channel and along the top edge and the window slides out to the inside edge of the channel.

Interesting. Deed is done now. I ended up removing the aluminum channel by drilling out the rivets. TM states that some had screws while other had rivets. I will replace them with screws in the event my dumb areaks another window.

Overall pretty easy.
Blair