recon
Member
- 45
- 0
- 6
- Location
- verbank,ny
Can someone tell me if a winch and all its parts from a 1953 Reo 6x6 can be put on a 1970 Kaiser M35a2?
recon
Dutchess County, NY
recon
Dutchess County, NY
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1953 Reo winch
- Thread starter recon
- Start date
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,132
- 113
- Location
- Athens, Ga.
Everything is the same except the driveshaft. The gasser driveshaft is a larger diameter and may require trimming where it passes the bellhousing.
acetomatoco
New member
- 2,198
- 7
- 0
Lotsa MF winch driveshafts around. try jatonka@telenet.net the AVM hub guy. He has shear pins too.
- 12,195
- 325
- 0
- Location
- gainesville, ga.
ask bfr, he did the swap and tell what it takes
- 34,012
- 1,808
- 113
- Location
- GA Mountains
I've done the exact same swap twice. Clinto is right about clearancing the bellhousing for the gasser shaft. Ace is also right about there being alot of multifuel shafts about. If you do purchase a multifuel shaft you will need the round 4 bolt flange yoke for the PTO. I think the big dealers can get this item but don't know cost yet. I need one myself.