• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

1992 M998 HMMWV Hub Question

shor2832

New member
14
0
0
Location
Middletown, RI
I was just looking everything over today and saw oil leaking on the tire of the front right hub. I immediately thought the worst - blown seal or something but it seams this rubber line isn't connected to the hub. Is it a breather? The oil was definitely coming from this area. Any thoughts?
IMG_3117.jpg
 

NDT

Well-known member
Steel Soldiers Supporter
10,337
6,285
113
Location
Camp Wood/LC, TX
It is a breather, look for a small poly line that should be attached there. I would reconnect the line, refill the hub, clean the oil up, and go for a ride. Most likely the oil is coming from the seal.
 

shor2832

New member
14
0
0
Location
Middletown, RI
Yes you can see the breather line in the pic. The wierd thing is it is too short by about four inches to connect- the clamp is still on the end and everything. It is carefully routed and held in place with about four or five hangers.
 
Top