• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2005 M1083A1 won't turn off

acropilot

Member
74
1
8
Location
Santa Ynez, CA
Hi All,

I was driving my 1083 today. The engine won't turn off when i turn off the master switch and the toggle switch. I had to turn off by turning off the master Disconnect switch by the batteries.

Any ideas or suggestions would be appreciated.

Best,

Tony
 

NDT

Well-known member
Steel Soldiers Supporter
10,436
6,486
113
Location
Camp Wood/LC, TX
Does your truck have those toggle switches under the cab near the alternator, and are they off?
 

acropilot

Member
74
1
8
Location
Santa Ynez, CA
Yes. And they are indeed off.

Other observations today.

1. Both 12v and 24v gauges are not registering.

2. Checked all circuit breakers. None tripped.
 

acropilot

Member
74
1
8
Location
Santa Ynez, CA
Well, it turned out to be a sticky relay. Actually I pressed on the relay and it went in a little bit. It may have been that it wasn't fully seated. I went through all of the relays and made sure they are all seated. Good to go :)
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks