k20
New member
- 18
- 0
- 1
- Location
- Monroe, NC
Hey guys, out tinkering with my CUCV till I can find a fuel shutoff solenoid to see if itll ever live again. Anyway, the wiring that goes down to the 24v power port under the dash. I want to remove it, to get rid of some of the rat nest of wiring. I see there are 2....circuit boards in this wiring harness. If I remove it, is it going to screw something else up? In the engine bay between the vacuum pump and the tranny dipstick, there is a flat plug with 7 or 8 wires, can I just unplug this and pull the harness out and have everything else still function as normal?
Another thing, behind the dash, down where a brake controller would be located, under where the radio would be, there are 2 bosch relays, what are these for? They are mounted to a plate that is bolted to the bottom part of the dash?
Another thing, behind the dash, down where a brake controller would be located, under where the radio would be, there are 2 bosch relays, what are these for? They are mounted to a plate that is bolted to the bottom part of the dash?