I'm new to military trucks, had old pick ups for years. My fuel pedal sticks at where it's pushed down to. I can pull it back up by hand. I have sprayed WD40 on the bottom of it where it's attached and pivots, hasn't helped. So before I screw up something, anybody else had same problem? Solutions? Thanks for the help in advance.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
5 ton gas (OK fuel) pedal sticks
- Thread starter Tacitus
- Start date
- 9,604
- 1,493
- 113
- Location
- mid- michigan
Are the return springs in place ?
You may also want to include what model 5 ton.
And update you location with a state .
Last edited:
- 1,965
- 279
- 83
- Location
- Colchester, VT
I've never had much luck fixing that without completly removing the pin to clean everything up.
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
I tightened up my return spring, and lubed the bellcrank mechanism on the engine side of the firewall. Been fine since.
The King Machine
Active member
- 396
- 92
- 28
- Location
- Vancouver, British Columbia
My Deuce pedal is doing the same thing, I can lift the pedal up and the idle will drop. Sounds like I need to pull it apart and clean it up.
farmerboywyotech
Member
- 161
- 2
- 18
- Location
- Argyle MI
Sounds like you guys arent driving them enough 
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk
BEASTMASTER
Active member
- 899
- 142
- 43
- Location
- Burgaw, N.C.
yep ,I had that problem. the only way to FIX it is to take the pin out ,file it up real good,and run a drill through the hole in the pedal. use never sieze when putting it back together.
- 18,541
- 5,847
- 113
I guess you missed this in Porky's previous post.
The specific model of 5-Ton will yield for you better answers.
Some folks probably haven't replied for lack of specifics.
Correcting your profile location is a SS Website RULE.... Please update it.
Thank you.