6.2l injectors

[123mack]

Can anyone reccommend a good source for re-manned injectors?

 

[HardCorps79]

Check out this previous post on the subject:
http://www.steelsoldiers.com/cucv/39904-injectors.html

 

[123mack]

Thanks for the thread. I checked the links, one only had 6.5 injectors and the other was out of stock. The search continues.

 

[HardCorps79]

If you don't mind forking over a fat chunk of change I believe realdiesel.com has a rebuild service. Have heard good things, but the prices are steep.

 

[ralbelt]

I had mine rebuilt at a local diesel shop where the rebuild injectors and pumps,the truck ran great till a head gasket blew now both heads are out being tested and resurfaced. Rebuild of injectors was just under 4.

 

[niferous]

I thought it was really easy to rebuild the injectors of a 6.2?

 

[allrevup]

Rebuilding injectors is easy. Follow one of the many step by step instructions in this site and others, Cleanliness is very important .
The tricky part is how to check for proper atomization and flow balance between injectors... that takes know how and special equipment

 

[lavarok]

http://www.steelsoldiers.com/engine-drivetrain/40577-accurate-diesel-orlando-fl.html

 

[Stoudty]

Hi, I am new to the site and have a 84 cucv bought at an auction from a fire company. (We call it the Santa Blazer) Would bad injectors cause the engine to hesitate at a fixed speed of 55-65? It feels like the motor cuts out momentarily and then jumps back to full power? Thanks

 

[ken]

I'm with ranch hopper. That's a simptom of a plugged fuel filter. And or a lift pump going bad. Check the oil for diesel in it. If the fuel pump is going bad it will leak fuel into the crankcase.

 

[Stoudty]

Thanks. I'm a real newbie at the automotive stuff. I already replaed the starter and did a 12 volt conversion. Whats the procedure for changing the fuel filter? Cna I find the how to in a haynes manual?

 

[Stoudty]

Thanks. This site is awesome!